Stability and load-carrying capacity of three-dimensional long-span steel arch bridges

The behavior of several models of three-dimensional long-span steel arch bridges is investigated for evaluating the effects of various design parameters on both the strength and stability of these special structures. The major concerns in the design of a long-span steel arch bridge, from the structural safety point of view, are the yield and buckling failures. Different design parameters may affect the failure load for either type of failure in various ways. This study investigates how changes in certain design parameters would affect the behavior of steel arch bridges, which could lead to an optimum design of this type of bridge structures. The effects of the plate girder stiffness and arch bracing stiffness as well as the rise-to-span ratio and inclination of the arches towards each other are examined in this study. Both critical buckling load and the load-carrying capacity of each design alternative are investigated using the finite element method. All design alternatives are based on the latest AASHTO code for highway bridge design. It is concluded from this study that the inclined arch bridge using the maximum practical rise-to-span ratio (which is about 0.25) is the most favorable design. In addition, the increase in the stiffness of the plate girder does not reduce the bending moments in the arch ribs. However, providing a lateral bracing system with sufficient stiffness greatly reduces the out-of-plane bending moments and increases the load-carrying capacity and the critical buckling load of a long-span arch bridge.