| 基于UG/Drafting的公差标注系统开发研究 |
| |
| 引用本文： | 庞广智,任家骏,吴凤林,孙桓五,李颖. 基于UG/Drafting的公差标注系统开发研究[J]. 机械管理开发, 2009, 24(3) |
| |
| 作者姓名： | 庞广智 任家骏 吴凤林 孙桓五 李颖 |
| |
| 作者单位： | 1. 太原理工大学,机械工程学院,山西,太原,030024
2. 防化指挥工程学院基础部,北京,102205 |
| |
| 摘 要： | 针对当前UG/Drafting平台公差标注的薄弱环节,提出了公差标注的系统架构,并介绍了框架设计的基本内容;最后利用Visual C++6.0编译器.以UG/OPEN为工具开发了二维公差标注系统.开发的系统可满足工程制图的实际需要,并对UG其他方面的二次开发有一定指导意义.
|
| 关 键 词： | 公差 二次开发 |
Development on Tolerance Marking System Based on UG/Drafting |
| |
| PANG Guang-zhi,REN Jia-jun,WU Feng-lin,SUN Huan-wu,LI Yin. Development on Tolerance Marking System Based on UG/Drafting[J]. Mechanical Management and Development, 2009, 24(3) |
| |
| Authors: | PANG Guang-zhi REN Jia-jun WU Feng-lin SUN Huan-wu LI Yin |
| |
| Affiliation: | Institute of Mechanical Engineering;Taiyuan University of Technology;Taiyuan 030024;Shanxi;2.Basic Department;Chemical Defense Command School;Changping 102205;Beijing |
| |
| Abstract: | In view of the insufficiency of tolerance marking on the current UG/Drafting platform,the author puts forward the system architecture of tolerance marking system,introduced the basic content about the system framework design,and developed two-dim tolerance marking system with UG/OPEN on the Visual C++6.0 compiler.The system is able to meet the practical requirement of engineering drawing,and is helpful to the other secondary development on UG. |
| |
| Keywords: | UG/Drafting UG/OPEN |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
|
