| 电刷架成型工艺及模具设计 |
| |
| 引用本文： | 金九大,陈杰.电刷架成型工艺及模具设计[J].微特电机,2004,32(3):43-44. |
| |
| 作者姓名： | 金九大 陈杰 |
| |
| 作者单位： | 1. 上海交通大学,上海,200030;中国电子科技集团公司第21研究所,上海,200233
2. 上海交通大学,上海,200030 |
| |
| 摘 要： | 通过对塑件结构特点的分析,介绍了其塑压成型工艺、成型模具结构特点及其操作过程,并且分析了模具设计、制造中的一些关键问题。
|
| 关 键 词： | 电刷架 成型工艺 塑压成形 模具 |
| 文章编号： | 1004-7018(2004)03-0043-02 |
| 修稿时间： | 2003年3月5日 |
The Forming Technology and the Design of Die for Brush Holder |
| |
| JIN Jiu-da.The Forming Technology and the Design of Die for Brush Holder[J].Small & Special Electrical Machines,2004,32(3):43-44. |
| |
| Authors: | JIN Jiu-da |
| |
| Affiliation: | JIN Jiu-da~ |
| |
| Abstract: | Through the analysis of the structure characteristic of the plastic part , the technological process of compress molding,and the traits of mould structure as well as the procedure of its operating were introduced .Some key problems in the design and manufacture of the forming mould were elaborated. |
| |
| Keywords: | brush holder forming technology compress molding die |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
