首页 | 本学科首页   官方微博 | 高级检索  
     

加速冷却对X70钢热影响区组织与韧性的影响
引用本文:于少飞,钱百年,国旭明. 加速冷却对X70钢热影响区组织与韧性的影响[J]. 金属学报, 2005, 41(4): 401-406
作者姓名:于少飞  钱百年  国旭明
作者单位:中国科学院金属研究所,沈阳,110016
基金项目:国家重点基础研究发展规划资助项目G1998061511
摘    要:根据加速冷却对TMCP钢组织与性能的影响,提出在X70管线钢焊接过程中以加速冷却方式改善热影响区韧性的方法.热模拟及实际焊接接头实验结果表明:适当提高冷速后,热影响区贝氏体基体中高碳高硬度的M—A组元明显减少,并被韧性的残余奥氏体薄膜所取代;而在喷水冷却的高冷速下得到了粗大贝氏体束组织,韧性反而没有改善.选择适当的冷却速度,使热影响区获得韧性良好的中温转变组织,是提高管线钢热影响区韧性的简单而有效的途径.

关 键 词:管线钢 加速冷却 奥氏体薄膜 贝氏体 热影响区
文章编号:0412-1961(2005)04-0402-05
收稿时间:2004-04-21
修稿时间:2004-06-15

Effect Of Accelerating Cooling On Microstructure And Toughness Of HAZ Of X70 Pipeline Steel
YU Shaofei,QIAN Bainian,GUO Xuming. Effect Of Accelerating Cooling On Microstructure And Toughness Of HAZ Of X70 Pipeline Steel[J]. Acta Metallurgica Sinica, 2005, 41(4): 401-406
Authors:YU Shaofei  QIAN Bainian  GUO Xuming
Affiliation:Institute of Metal Research, The Chinese Academy of Sciences, Shenyang 110016
Abstract:Based on the effect of accelerating cooling on the microstructure and properties of thermo-mechanical control process (TMCP) steel, we proposed to adopt this method for improvement of heat affect zone (HAZ) toughness of X70 pipeline steel. The results of simulated experiment and actual weldment indicate that at appropriate accelerating cooling rate the M-A constituent in HAZ is reduced obviously in amount and replaced by tough austenite films. Coarse bainitic sheaves were obtained when jetting water directly to the sample and the toughness is not improved. Accelerating cooling with appropriate cooling rate is a simple and efficient method to improve the HAZ toughness.
Keywords:pipeline steel   accelerating cooling   austenite film   bainite   heat affect zone
本文献已被 CNKI 维普 万方数据 等数据库收录!
点击此处可从《金属学报》浏览原始摘要信息
点击此处可从《金属学报》下载全文
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号