|
|||||
|
|
| 光纤激光轧辊毛化工艺参数研究 | |
| 引用本文： | 张瑞华,梁海姣,李宝磊,韩帅,尹燕.光纤激光轧辊毛化工艺参数研究[J].应用激光,2012,32(2):104-107. |
| 作者姓名： | 张瑞华 梁海姣 李宝磊 韩帅 尹燕 |
| 作者单位： | 张瑞华:兰州理工大学甘肃省有色金属新材料省部共建国家重点实验室, 甘肃 兰州 730050 梁海姣:兰州理工大学甘肃省有色金属新材料省部共建国家重点实验室, 甘肃 兰州 730050 李宝磊:兰州理工大学甘肃省有色金属新材料省部共建国家重点实验室, 甘肃 兰州 730050 韩帅:兰州理工大学甘肃省有色金属新材料省部共建国家重点实验室, 甘肃 兰州 730050 尹燕:兰州理工大学甘肃省有色金属新材料省部共建国家重点实验室, 甘肃 兰州 730050 |
| 摘 要： | 针对CO2激光器和YAG激光器的种种不足,采用光纤激光毛化柔性工作站,对轧辊表面进行了不同尺寸和分布的毛化点彤貌加工。分析了光纤激光功率、脉冲频率、脉冲宽度、扫描速度、离焦量等工艺参数对毛化点形貌的影响。结果表明:通过合理匹配毛化工艺参数,能够得到精确可控的轧辊毛化形貌和满足生产要求的粗糙度,也可以实现相对无序的毛化点排列。 |
| 关 键 词： | 光纤激光 毛化 轧辊 |
| 收稿时间： | 2011/12/20 |
Experimental Parameters Study on Roll Texturing with Fiber Laser |
|
| Zhang Ruihua,Liang Haijiao,Li Baolei,Han Shuai,Yin Yan.Experimental Parameters Study on Roll Texturing with Fiber Laser[J].Applied Laser,2012,32(2):104-107. | |
| Authors: | Zhang Ruihua Liang Haijiao Li Baolei Han Shuai Yin Yan |
| Affiliation: | (State Key Laboratory of Gansu Advanced Non-ferrous Metal Materials,Lanzhou University of Technology, Lanzhou,Gansu 730050,China) |
| Abstract: | As a result of various deficiencies of the CO2 laser and YAG laser , different sizes and patterns of texturing spots were fabricated on the surface of roller by using fiber laser texturing flexible workstation. The impact rules of texturing topography that came from fiber laser power, laser pulse frequency, pulse width, velocity of process, reasonable defocus and etc. were analyzed. The result showed, by matching the texturing parameters reasonably, accurately controlled topography with a certain roughness that could meet the demand from production was obtained, furthermore, it was preliminarily realized that the spots pattern arranged relatively unordered. |
| Keywords: | fiber laser texturing roll |
| 本文献已被 CNKI 等数据库收录！ | |