首页 | 本学科首页   官方微博 | 高级检索  
     

工业齿轮油摩擦特性的初步研究
引用本文:林福严,张志华,孙帅帅,曹凌飞. 工业齿轮油摩擦特性的初步研究[J]. 润滑与密封, 2011, 36(11). DOI: 10.3969/j.issn.0254-0150.2011.11.004
作者姓名:林福严  张志华  孙帅帅  曹凌飞
作者单位:中国矿业大学(北京)机电与信息工程学院 北京100083
基金项目:博士点基金项目(20090023110007); 摩擦学国家重点实验室开放基金项目(SKLTKF09B09)
摘    要:齿轮油是工业生产中广泛使用的润滑剂,其摩擦性能对节能减排及设备寿命有重要影响。使用改进的MS-800四球试验机,对1种工业白油和2种工业齿轮油在多个不同滑动速度和不同负载下进行摩擦因数测试试验。结果表明:2种工业齿轮油的摩擦因数都显著低于工业白油,并且它们之间也有明显的区分性;从3种润滑剂的摩擦特性来看,速度是影响摩擦因数的显著因素,随着速度的提高,摩擦因数显著下降;载荷对摩擦因数的影响较小,影响规律也比较复杂。

关 键 词:齿轮油  四球试验机  摩擦特性  

Study on the Friction Characteristics of Industrial Gear Oil
Lin Fuyan,Zhang Zhihua,Sun Shuaishuai,Cao Lingfei. Study on the Friction Characteristics of Industrial Gear Oil[J]. Lubrication Engineering, 2011, 36(11). DOI: 10.3969/j.issn.0254-0150.2011.11.004
Authors:Lin Fuyan  Zhang Zhihua  Sun Shuaishuai  Cao Lingfei
Affiliation:Lin Fuyan Zhang Zhihua Sun Shuaishuai Cao Lingfei(School of Mechanical Electronic & Inform,China University of Mining and Technology(Beijing),Beijing 100083,China)
Abstract:Gear oil is widely used as industrial lubricant.The friction performances of gear oil have an important effect on energy efficiency and equipment life.Friction characteristics of a white oil and two industrial gear oils were measured in different sliding speeds and different loads with an improved MS-800 four-ball friction-wear tester.The results show that the friction coefficients of the two industrial gear oils are significantly lower than that of the white oil and there are significant distinctions betwe...
Keywords:gear oil  four-ball friction tester  friction characteristics  
本文献已被 CNKI 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号