| 橡胶装置溶剂泵机械密封泄漏原因分析与处理 |
| |
| 引用本文： | 吕广红,黄崇林,黎景宏. 橡胶装置溶剂泵机械密封泄漏原因分析与处理[J]. 润滑与密封, 2011, 36(11). DOI: 10.3969/j.issn.0254-0150.2011.11.030 |
| |
| 作者姓名： | 吕广红 黄崇林 黎景宏 |
| |
| 作者单位： | 1. 广东石油化工学院 广东茂名525000
2. 茂名石油化工公司乙烯厂 广东茂名525000 |
| |
| 摘 要： | 分析橡胶装置溶剂泵机械密封泄的原因,结果表明,溶剂泵机械密封泄漏的原因是密封端面比压过大造成静环急剧磨损而引起的。将原来的非平衡型改造成平衡型的机械密封后,密封端面的密封性能和磨耗性都能满足要求,使用寿命有了明显提高。
|
| 关 键 词： | 溶剂泵 机械密封 泄漏 |
Analysis and Treatment of Mechanical Seals Leaks for Rubber Equipment Solvent Pumps |
| |
| Lv Guanghong,Huang Chonglin,Li Jinghong. Analysis and Treatment of Mechanical Seals Leaks for Rubber Equipment Solvent Pumps[J]. Lubrication Engineering, 2011, 36(11). DOI: 10.3969/j.issn.0254-0150.2011.11.030 |
| |
| Authors: | Lv Guanghong Huang Chonglin Li Jinghong |
| |
| Affiliation: | Lv Guanghong1 Huang Chonglin1 Li Jinghong2(1.Guangdong University of Petrochemical Technology,Maoming Guangdong 525000,China,2.Ethylene Plant of Maoming Petrochemical Corporation,China) |
| |
| Abstract: | The leak reasons of the mechanical seals for solvent pumps was analyzed,the results indicated that the leak reason was that the seal face specific pressure was too high which lead to the abrasion of stator ring suddenly.After transforming the original non-balanced mechanical seals to the balanced mechanical seal,the seal character and the abradability of seal face could satisfy the request,service life was improved obviously. |
| |
| Keywords: | solvent pumps mechanical seals leaks |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
