| 基于序列二次规划算法的点阵夹芯结构优化设计 |
| |
| 引用本文： | 龙连春,薛飘,刘金坡,王鲲鹏,谭指. 基于序列二次规划算法的点阵夹芯结构优化设计[J]. 北京工业大学学报, 2016, 42(12): 1805-1809. DOI: 10.11936/bjutxb2016080018 |
| |
| 作者姓名： | 龙连春 薛飘 刘金坡 王鲲鹏 谭指 |
| |
| 作者单位： | 北京工业大学机械工程与应用电子技术学院,北京,100124;北京宇航系统工程研究所,北京,100076 |
| |
| 基金项目： | 国家自然科学基金资助项目(11272020) |
| |
| 摘 要： | 为了研究夹芯单胞变化对结构承载能力的影响，建立了点阵夹芯结构的优化设计模型，以结构刚度最大为目标函数，考虑体积约束及单胞尺寸约束对夹芯单胞尺寸分布进行优化设计，并以四面体单胞夹芯结构的优化设计为例进行详细方法说明。采用序列二次规划法求解优化模型，完成了以结构刚度最大为目标的井字梁夹芯结构的优化设计，验证了模型、方法及优化效果。
|
| 关 键 词： | 点阵夹芯结构 四面体单胞 序列二次规划算法 |
Optimization of Lattice Sandwich Structure With Sequential Quadratic Programming Algorithm |
| |
| LONG Lianchun,XUE Piao,LIU Jinpo,WANG Kunpeng,TAN Zhi. Optimization of Lattice Sandwich Structure With Sequential Quadratic Programming Algorithm[J]. Journal of Beijing Polytechnic University, 2016, 42(12): 1805-1809. DOI: 10.11936/bjutxb2016080018 |
| |
| Authors: | LONG Lianchun XUE Piao LIU Jinpo WANG Kunpeng TAN Zhi |
| |
| Abstract: | To study the influence of the core cell on the structural carrying capacity, in this paper, lattice sandwich structure optimization model was established, which was elaborated by tetrahedron unit cell of sandwich structure. For the purpose of verifying the effectiveness of the optimization model and the solution, a sandwich tic-tac-toe beam structure with the goal of maximizing the stiffness of the structure was optimized by using the method of sequential quadratic programming. |
| |
| Keywords: | lattice sandwich structure tetrahedron unit cell sequential quadratic programming algorithm |
| 本文献已被 万方数据 等数据库收录！ |
|
