| 平行双螺杆挤出机捏合盘元件设计方法深入探讨 |
| |
| 引用本文： | 毕超,曹利,李翱,江波. 平行双螺杆挤出机捏合盘元件设计方法深入探讨[J]. 塑料, 2011, 40(3) |
| |
| 作者姓名： | 毕超 曹利 李翱 江波 |
| |
| 作者单位： | 北京化工大学机电工程学院,北京,100029 |
| |
| 基金项目： | 中央高校基本科研业务费项目 |
| |
| 摘 要： | 对捏合盘元件设计方法进行了深入研究.利用有限元数值模拟的方法从产量、齿轮箱轴承受力、比能耗、停留时间和力学性能等方面量化对比了中心距修正法和法向等间隙修正法设计的捏合盘元件的加工性能和力学性能.研究内容对平行双螺杆挤出机捏合盘元件设计具有一定的帮助.
|
| 关 键 词： | 间隙修正 捏合盘元件 Ansys Ployflow 有限元法 |
Deeply Study on Design Method of Kneading Disc Element of Parallel Twin-Screw Extruder |
| |
| BI Chao,CAO Li,LI Ao,JIANG Bo. Deeply Study on Design Method of Kneading Disc Element of Parallel Twin-Screw Extruder[J]. Plastics, 2011, 40(3) |
| |
| Authors: | BI Chao CAO Li LI Ao JIANG Bo |
| |
| Affiliation: | BI Chao,CAO Li,LI Ao,JIANG Bo(College of Mechanical and Electrical Engineering,Beijing University of Chemical Technology,Beijing 100029,China) |
| |
| Abstract: | The design methods of kneading disc elements were studied deeply.Using the finite element method,the flow rate,gearbox bearing load,specific energy consumption,mean residence time and the mechanical property of the two kinds of kneading disc elements,which were designed by center distance correction method and normal direction equal gap correction method,were compared.The present study provided guidance for the design of screw element in parallel twin-screw extruder. |
| |
| Keywords: | gap correction kneading disc element Ansys Ployflow FEM |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
|
