首页 | 本学科首页   官方微博 | 高级检索  
     

气浮工艺用于海水淡化预处理试验研究
引用本文:孙宝伶,李爱斌,王瑾. 气浮工艺用于海水淡化预处理试验研究[J]. 供水技术, 2011, 5(5): 15-19. DOI: 10.3969/j.issn.1673-9353.2011.05.005
作者姓名:孙宝伶  李爱斌  王瑾
作者单位:1. 天津市公用事业设计研究所,天津,300100
2. 天津市公用事业设计研究所,天津300100;天津大学环境科学与工程学院,天津300072
摘    要:以三氯化铁和聚合氯化铝作为混凝剂,氯水作为氧化剂,考察了气浮工艺用于海水淡化预处理的运行效果.结果表明:预氧化可以强化混凝+气浮预处理工艺对浊度、CODMn、UV254和TOC的去除效果,三氯化铁的最佳投加量为15~20 mg/L,聚合氯化铝最佳授加量为6~10mg/L,最佳气浮回流比为15%;在最佳运行条件下,预处理...

关 键 词:气浮工艺  海水淡化  预处理  反渗透  混凝剂  氧化剂

Test of air floatation process for the pretreatment of seawater desalination
Sun Baoling,Li Aibin,Wang Jin. Test of air floatation process for the pretreatment of seawater desalination[J]. Water Technology, 2011, 5(5): 15-19. DOI: 10.3969/j.issn.1673-9353.2011.05.005
Authors:Sun Baoling  Li Aibin  Wang Jin
Affiliation:Sun Baoling1,Li Aibin1,2,Wang Jin1(1.Tianjin Public Utilities Design & Research Institute,Tianjin 300100,China,2.School of Environmental Science and Engineering,Tianjin University,Tianjin 300072,China)
Abstract:Air floatation process for the pretreatment of seawater desalination was studied with ferric chloride and polyaluminium chloride as coagulant,chlorine water as oxidant.The result showed that pre-oxidation could enhance the efficiency of coagulation+ air floatation process for the removal of turbidity,CODMn,UV254 and TOC.The optimal dosage for ferric chloride was 15~20 mg/L and 6~10 mg/L for polyaluminium chloride,and optimal reflux ratio of air floatation was 15%.The pretreatment process showed satisfied ef...
Keywords:air floatation process  seawater desalination  pretreatment  reverse osmosis  coagulant  oxidant  
本文献已被 CNKI 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号