Influence of Stress Ratio and Stress Path on Behavior of Loose Decomposed Granite

This paper presents results from four series of triaxial compression tests of loosely compacted decomposed granite (DG) or silty sand on both isotropically and anisotropically consolidated specimens. These tests included undrained tests, drained tests with constant deviator stress, and a decreasing mean effective stress path. The silty sand possessed high compressibility during isotropic compression. The observed high compressibility is probably attributed to the loose soil structure created by using the moist tamping method and the presence of crushable feldspar in the soil. Static liquefaction behavior and the so-called “reversed” sand behavior were observed in all undrained tests. This “reversed” sand behavior can be readily explained by the high compressibility of DG leading to the nonparallel and converging nature of the initial state line and the critical state line. Preshearing resulted in a more brittle response in the postpeak behavior. The higher the initial stress ratio (ηc), the smaller the ductility. Structural collapse of DG was observed. This collapse is characterized by a sudden large increase in both the axial and contractive volumetric strains. The mobilized angles of friction at collapse range from 31.8° to 38.7°, which are smaller than the critical state angle (?col′), but higher than the mobilized friction angle of the instability line (28.1°) determined by the isotropically consolidated undrained tests. A trilinear approximate relationship can be found between ?col′ and ηc and a liquefaction potential index is introduced to provide a simple preliminary design parameter for static liquefaction and instability prone slopes.