| Abstract: | In this study, ultrasonic irradiation and in situ emulsion polymerization were combined to prepare stable poly(methyl methacrylate‐co‐n‐butyl acrylate) (P(MMA‐BA))/carbon nanotubes (CNTs) composite emulsion, which solves the dispersion problem of CNTs in the latex. Two stages were adopted. In Stage I, ultrasonically initiated in situ emulsion polymerization was conducted to disperse CNTs and prepare the seed emulsion containing polymer coated CNTs. In Stage II, conventional in situ emulsion polymerization was conducted to further enhance the monomer conversion and solid content. The dispersion behavior of MWCNTs in aqueous solution under ultrasonic irradiation was investigated by spectrophotometry. The effects of CNTs content on the emulsion stability and mechanical properties of composite film were studied. The results suggest that in the composite emulsion the long CNTs with a diameter of 20–40 nm are separated and dispersed by the formed polymer latex nanoparticles with a size of 20–40 nm. The spherical polymer latex nanoparticles adhere to the wall of CNTs to form a structure like “grapes on the twig.” The smooth, uniform, and flexible polymer/CNTs composite films were prepared from the composite emulsion. The CNTs can be individually dispersed in P(MMA‐BA)/CNTs composite film. Tensile tests suggest that with the increase in the CNTs content, the Young's modulus and the yield strength of the film increase. Only at 1 wt % CNTs, the Young's modulus increases from 124 to 289 MPa, and the yield strength is improved about ～14%. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 100: 3123–3130, 2006 |
