基于三代核电技术的电气贯穿件导体组件研制 |
| |
引用本文: | 周缘,王广金,周天,陈青,赵雨恒,邱新媛,王江武,周寒.基于三代核电技术的电气贯穿件导体组件研制[J].核动力工程,2019,40(4):153-156. |
| |
作者姓名: | 周缘 王广金 周天 陈青 赵雨恒 邱新媛 王江武 周寒 |
| |
作者单位: | 中国核动力研究设计院,成都,610213;中国核动力研究设计院,成都,610213;中国核动力研究设计院,成都,610213;中国核动力研究设计院,成都,610213;中国核动力研究设计院,成都,610213;中国核动力研究设计院,成都,610213;中国核动力研究设计院,成都,610213;中国核动力研究设计院,成都,610213 |
| |
摘 要: | 根据三代核电厂对各类特殊信号传输要求,以三同轴导体组件为例,针对三同轴电缆贯穿安全壳及其射频信号传输的特殊要求,对电气贯穿件专用的三同轴导体组件的设计、制造、工艺试验及型式试验进行了阐述。最终的型式试验结果表明,三同轴导体组件的结构设计合理、制造工艺可行,能够满足三代核电厂电气贯穿件技术要求,其研究成果可直接应用于三代核电厂电气贯穿件的设计。
|
关 键 词: | 三代核电厂 电气贯穿件 三同轴导体组件 |
Development of Feedthrough Assembly for Electrical Penetration Assembly Based on Third-Generation Nuclear Power Technology |
| |
Abstract: | According to the special signal transmission requirements of the third-generation nuclear power plants, taking the tri-axial feedthrough as an example, and aiming at the special requirements of the tri-axial cables through the containment and its radio frequency signal transmission, this paper describes the design, manufacture, process test and type test of the special tri-axial feedthrough for the electrical penetration assembly. The results of the final type test show that the structure design of the tri-axial feedthrough is reasonable and the manufacturing process is feasible, which can meet the technical requirements of the electrical penetrator assembly in third-generation power plants, and its research results can be directly applied to the design of the electrical penetrator assembly for third-generation power plants. |
| |
Keywords: | |
本文献已被 CNKI 万方数据 等数据库收录! |
| 点击此处可从《核动力工程》浏览原始摘要信息 |
|
点击此处可从《核动力工程》下载全文 |
|