| 穿孔和非穿孔消声器压力损失研究 |
| |
| 引用本文： | 胡效东,周以齐,方建华,凌在山.穿孔和非穿孔消声器压力损失研究[J].机械设计与研究,2007,23(2):110-112,116. |
| |
| 作者姓名： | 胡效东 周以齐 方建华 凌在山 |
| |
| 作者单位： | 1. 山东大学,机械工程学院,济南,250061
2. 山东众友工程机械有限公司,临沂,276006 |
| |
| 摘 要： | 本文利用三维CFD方法,研究了抗性消声器内部流体动力学仿真和压力损失计算的过程,分析了四种穿孔和非穿孔单腔消声器的流场流速和压力分布,研究了相应的压力损失随入口流速的变化趋势.得出结论:,穿空管消声器的流体动力学性能要好于非穿孔类消声器,对膨胀腔冲击比较小;在相同边界条件下,穿孔管消声器的压力损失大于非穿孔类消声器.对复杂抗性消声器的设计有比较好的参考价值.
|
| 关 键 词： | CFD 压力损失 穿孔类消声器 非穿孔类消声器 穿孔管 抗性消声器 压力损失计算 研究 perforated Research Loss 价值 设计 边界条件 比较 冲击 力学性能 内部流体 空管 变化趋势 压力分布 流速 流场 分析 |
| 文章编号： | 1006-2343（2007）02-110-03 |
| 修稿时间： | 2006-09-25 |
Pressure Loss Research of Perforated and Non- perforated Muffler |
| |
| Hu Xiao-dong,Zhou Yi-qi,FANG Jian-hua,LING Zai-shan.Pressure Loss Research of Perforated and Non- perforated Muffler[J].Machine Design and Research,2007,23(2):110-112,116. |
| |
| Authors: | Hu Xiao-dong Zhou Yi-qi FANG Jian-hua LING Zai-shan |
| |
| Affiliation: | 1. School of Mechanical Engineering, Shandong University, Jinan 250061 ; 2, Shandong Joyo Construction Machinery Co, , hd, Linyi 276006, China |
| |
| Abstract: | The method of 3-Demension CFD is used to study the procedures of fluid dynamics simulation and computation of pressure loss of single cavity mufflers.The distribution differences of velocity and pressure in the four types of mufflers including perforated and non-perforated ones have been analyzed,and the trends of pressure loss with the change of inlet-velocity have been studied.Corresponding results have been obtained as follows: the fluid dynamics of perforated muffler is better than the non-perforated mufflers;the pressure loss of non-perforated muffler is much smaller than the perforated ones with the same boundary conditions.All the results are useful for complicate muffler design. |
| |
| Keywords: | CFD pressure loss perforated muffler non-perforated muffler |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
