| 影视盒面盖注塑模具设计 |
| |
| 引用本文： | 叶长青. 影视盒面盖注塑模具设计[J]. 模具技术, 2008, 0(1): 25-27 |
| |
| 作者姓名： | 叶长青 |
| |
| 作者单位： | 湖南科技职业学院,机电系,湖南,长沙,410118 |
| |
| 摘 要： | 通过分析制件的使用要求和结构要求，用Pro／E分模的方法，设计了分型面和成型零件，结果使模具结构简单可靠，便于加工，得出了利用现代化的手段设计模具在满足制件要求的前提下尽量使模具经济耐用的结论。
|
| 关 键 词： | 抽芯机构 滑块 型腔 型芯 顶出机构 |
| 文章编号： | 1001-4934（2008）01-0025-03 |
| 收稿时间： | 2007-05-29 |
| 修稿时间： | 2007-05-29 |
Injection mould design for vision audio box panel |
| |
| YE Chang-qing. Injection mould design for vision audio box panel[J]. Die and Mould Technology, 2008, 0(1): 25-27 |
| |
| Authors: | YE Chang-qing |
| |
| Abstract: | By analyzing operation and structure requirement, Pro/E was used for part surface design. The result make the mold structure simple and reliable and easy to manufacture. It is concluded that modern design method make mold as economical as possible with part manufacturing requirement satisfied. |
| |
| Keywords: | core pulling mechanism block cavity core ejection mechanism |
| 本文献已被 维普 万方数据 等数据库收录！ |
