基于ANSYS的杯形柔轮结构参数对柔轮应力的敏感度分析

为研制出谐波减速器的短杯柔轮,使用ANSYS的APDL语言开发了杯形谐波柔轮的参数化等效接触模型,利用该模型分析25机型到60机型的柔轮在波发生器作用下所受到的应力情况,并与经验理论公式计算值进行比较,验证柔轮与波发生器参数化等效接触模型的准确性,并描述柔轮的最大等效应力随柔轮型号的变化规律。针对32机型分析柔轮的关键结构参数,包括柔轮筒长、齿圈壁厚、光滑圆筒壁厚、齿宽、三个柔轮圆角半径等参数的变化对柔轮的最大等效应力和光滑圆筒部分最大等效应力的影响敏感度,为短杯柔轮的结构参数优化设计提供依据。另外,在热和结构耦合的情况下对柔轮与刚轮的接触模型进行简化,给出柔轮最大应力随温度的变化曲线,为研究柔轮在高低温环境下的失效提供依据。

Sensitivity Analysis of Cup-shaped Flexible Gear Parameters to Its Stress Based on ANSYS

To develop the cup-shaped flexible gear of harmonic reducer,APDL language of ANSYS is used to model its parametric interface,which is used to analyze the stress of flexible gears from type 25 to 60 under the effect of wave generator. The results,consistent with the experiential formulas,show the validity of the model and depict the relation between the flexible gear's maximum equal stress and the type of flexible gear. To the specific type of 32,the effects of variations of key structure parameters,including cylinder length,gear thickness,smooth cylindrical wall thickness,tooth width,and fillet radiuses of three flexible gears,on maximum equal stress of flexible gear and smooth cylinder,are analyzed,which provides the basis for structural parameter optimization. Under the coupling effect of heat and structure,temperature variation effect on stress of flexible gear is analyzed with simplified model,which provides the basis for research failure of flexible gear in the high and low temperature environment.