| 基于DEFORM-3D的不锈钢切削力有限元仿真 |
| |
| 引用本文： | 章振翔,张金明,王来钱.基于DEFORM-3D的不锈钢切削力有限元仿真[J].轻工机械,2011,29(4):40-42. |
| |
| 作者姓名： | 章振翔 张金明 王来钱 |
| |
| 作者单位： | 浙江工业大学车辆工程研究所,浙江杭州,310014 |
| |
| 摘 要： | 为更好地研究金属材料的切削加工过程,以DEFORM-3D软件为平台,利用有限元方法对0Cr18Ni9不锈钢的切削过程进行了建模与仿真,分析0Cr18Ni9不锈钢的切削力变化规律以及切削速度和进给量对其切削力的影响,并同理论计算结果进行对比验证。研究表明,DEFORM-3D软件所得仿真数据与理论计算结果吻合度较高,说明仿真结果具有较高的可信度,为系统地研究金属的切削过程提供了一种新的途径。
|
| 关 键 词： | 切削加工 DEFORM-3D软件 有限元仿真 切削力 |
FEA of Cutting Force of Stainless Steel Based on DEFORM-3D |
| |
| ZHANG Zhen-xiang,ZHANG Jin-ming,WANG Lai-qian.FEA of Cutting Force of Stainless Steel Based on DEFORM-3D[J].Light Industry Machinery,2011,29(4):40-42. |
| |
| Authors: | ZHANG Zhen-xiang ZHANG Jin-ming WANG Lai-qian |
| |
| Affiliation: | ZHANG Zhen-xiang,ZHANG Jin-ming,WANG Lai-qian(Institute of Vehicle Engineering,Zhejiang University of Technology,Hangzhou 310014,China) |
| |
| Abstract: | In order to improve the research on metal cutting process,DEFORM-3D was used as a platform,and the cutting process of 0Cr18Ni9 stainless steel was modeled and simulated by FEA,finally the change law of the cutting force of 0Cr18Ni9 stainless steel and the influence made by cutting speed and feed were analyzed,and the simulation data were made contrast with calculation data.The results show that the simulation data got by DEFORM-3D have a relatively high inosculation with the calculation data,which means sim... |
| |
| Keywords: | cutting process DEFORM-3D finite element analysis cutting force |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
