首页 | 本学科首页   官方微博 | 高级检索  
     

Co改性Fe_2O_3/AC催化剂低温SCR脱硝性能
引用本文:陈九玉,孙运兰.Co改性Fe_2O_3/AC催化剂低温SCR脱硝性能[J].有色金属工程,2017,7(2).
作者姓名:陈九玉  孙运兰
作者单位:安徽工业大学能源与环境学院,安徽工业大学能源与环境学院
基金项目:国家自然科学基金资助项目(No.51376007)和安徽省自然科学基金资助项目(No.1608085ME104),安徽省大学生创新创业训练计划项目(No.201410360236)
摘    要:以活性炭(AC)为载体,铁、钴为活性组分,采用等体积浸渍法制备Fe_2O_3/AC催化剂和Co-Fe_2O_3/AC催化剂。探讨了铁含量和钴对催化剂低温脱硝性能的影响。结果表明,当铁负载量为10%时能够取得比其它负载量较佳的NO转化效率;由于铁的存在,钴添加后能够均匀分散在催化剂表面,提供了更多的催化活性位,从而改善了Fe_2O_3/AC催化剂的低温选择性催化还原(SCR)脱硝活性。当Co/Fe质量比为0.7时,催化剂表现出较佳的脱硝效果。

关 键 词:Fe  Co  活性炭  低温SCR
收稿时间:2016/3/22 0:00:00
修稿时间:2016/4/12 0:00:00

Low-temperature Selective Catalytic Reduction of NOx with NH3 over Co modified Fe2O3/AC Catalysts
CHEN Jiuyu and SUN Yun-lan.Low-temperature Selective Catalytic Reduction of NOx with NH3 over Co modified Fe2O3/AC Catalysts[J].Nonferrous Metals Engineering,2017,7(2).
Authors:CHEN Jiuyu and SUN Yun-lan
Affiliation:School of Energy and Environment,Anhui University of Technology,Ma Anshan,School of Energy and Environment,Anhui University of Technology,Ma Anshan
Abstract:A series of Fe2O3/AC and Co-Fe2O3/AC catalysts, which treated activated carbon as support and iron and cobalt as active ingredient, were prepared by impregnation method to investigate the influence of different iron and cobalt concentrations on the denitrification performance in the low temperature. The experimental results showed that the sample with 10? displayed better conversion of NO than other ratios. Co oxide can be uniformly dispersed on the surface of catalyst due to the presence of Fe. This leads to provide more active sites, so the low-temperature SCR activity is improved. Co-Fe2O3/AC catalyst exhibited superior SCR activity with the mass ratio of Co/Fe=0.7.
Keywords:Fe  Co  activated carbon  low temperature SCR
本文献已被 CNKI 等数据库收录!
点击此处可从《有色金属工程》浏览原始摘要信息
点击此处可从《有色金属工程》下载全文
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号