首页 | 本学科首页   官方微博 | 高级检索  
     

流图法在光探测器芯片高频特性测量校准上的应用
引用本文:苗昂,黄永清,李轶群,吴强,黄辉,任晓敏. 流图法在光探测器芯片高频特性测量校准上的应用[J]. 半导体学报, 2007, 28(3): 448-452
作者姓名:苗昂  黄永清  李轶群  吴强  黄辉  任晓敏
作者单位:北京邮电大学光通信与光波技术教育部重点实验室,北京 100876;北京邮电大学光通信与光波技术教育部重点实验室,北京 100876;北京邮电大学光通信与光波技术教育部重点实验室,北京 100876;北京邮电大学光通信与光波技术教育部重点实验室,北京 100876;北京邮电大学光通信与光波技术教育部重点实验室,北京 100876;北京邮电大学光通信与光波技术教育部重点实验室,北京 100876
基金项目:国家重点基础研究发展计划(973计划) , 国家自然科学基金 , 教育部跨世纪优秀人才培养计划
摘    要:在采用光调制法测量光探测器芯片高频响应特性的过程中,测试系统往往忽视光调制器响应、高频探针衰减以及端口间失配等误差中的一项或几项.为了降低校准不完善对结果造成的误差,文中提出了基于信号流图的系统校准分析方法,考虑了各种频响误差及端口间失配的影响,推导出校准公式.利用该法对一种光探测器的典型测试系统--基于LCA(lightwave component analyzer)的测试系统做了进一步校准分析,在130MHz~20GHz范围内,测量了一种新型光探测器的高频响应参数S21,结果表明经流图法校准的S21参数比仅使用原有校准算法有明显改善,证明了该方法的可行性.

关 键 词:光探测器  高频响应  校准  图法  光探测器  芯片  高频特性  测量校准  应用  Application  Photodetectors  Frequency Characteristics  High  Calibration  Measurement  改善  算法  使用  响应参数  经流  范围  lightwave  component
文章编号:0253-4177(2007)03-0448-05
收稿时间:2006-08-02
修稿时间:2006-08-02

Application of "Flow-Graph" Technique in Measurement Calibration of High Frequency Characteristics of Photodetectors
Miao Ang,Huang Yongqing,Li Yiqun,Wu Qiang,Huang Hui and Ren Xiaomin. Application of "Flow-Graph" Technique in Measurement Calibration of High Frequency Characteristics of Photodetectors[J]. Chinese Journal of Semiconductors, 2007, 28(3): 448-452
Authors:Miao Ang  Huang Yongqing  Li Yiqun  Wu Qiang  Huang Hui  Ren Xiaomin
Affiliation:Key Laboratory of Optical Communication and Lightwave Technologies of the Ministry of Education,Beijing University of Posts and Telecommunications,Beijing 100876,China;Key Laboratory of Optical Communication and Lightwave Technologies of the Ministry of Education,Beijing University of Posts and Telecommunications,Beijing 100876,China;Key Laboratory of Optical Communication and Lightwave Technologies of the Ministry of Education,Beijing University of Posts and Telecommunications,Beijing 100876,China;Key Laboratory of Optical Communication and Lightwave Technologies of the Ministry of Education,Beijing University of Posts and Telecommunications,Beijing 100876,China;Key Laboratory of Optical Communication and Lightwave Technologies of the Ministry of Education,Beijing University of Posts and Telecommunications,Beijing 100876,China;Key Laboratory of Optical Communication and Lightwave Technologies of the Ministry of Education,Beijing University of Posts and Telecommunications,Beijing 100876,China
Abstract:In order to reduce the inaccuracy of traditional calibration,the "flow-graph" method is proposed.This method takes into account the effects of the inaccuracy of various frequency responses and the mismatch between different ports.Furthermore,a calibration formula is deduced.This method was applied to the further calibration analysis of a typical lightwave component analyzer (LCA)-based photodetector measurement system.The experiment of a novel photodetector demonstrates that in the range of 130MHz to 20GHz,an obvious improvement in the calibration of the S21 parameter has been achieved compared to the traditional algorithm,and the proposed method is proved feasible.
Keywords:photodetector   high frequency response   calibration
本文献已被 CNKI 维普 万方数据 等数据库收录!
点击此处可从《半导体学报》浏览原始摘要信息
点击此处可从《半导体学报》下载全文
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号