首页 | 本学科首页   官方微博 | 高级检索  
     

六种人工林木材胶合性能初步研究
引用本文:张玉萍,傅峰. 六种人工林木材胶合性能初步研究[J]. 木材加工机械, 2006, 17(4): 6-10
作者姓名:张玉萍  傅峰
作者单位:中国林科院木材工业研究所,北京,100091
基金项目:国际热带林木组织(ITTO)资助项目
摘    要:初步研究了杉木、杨树、巨桉、尾巨桉、柠檬桉和窿缘桉等六种人工林木材的胶合性能,结果表明:胶合剪切强度沿杉木、杨树、巨桉、尾巨桉、柠檬桉和窿缘桉顺序增大;六种木材胶合性能差异显著,其中杉木、杨树、巨桉和尾巨桉胶合性能较好,表现为胶合剪切强度能达到标准要求、且木破率高;柠檬桉和窿缘桉木破率低,难于胶合,胶合性能有待改进;胶粘剂类型影响木材胶合性能,其中API和PF剪切强度和木破率平均值高于PVAc和UF;热压胶合的PF和UF的离散性比冷压胶合的API和PVAc要差。

关 键 词:人工林木材  胶合性能
文章编号:1004-036X(2006)04-0006-05
修稿时间:2006-04-26

Preliminary research on bonding properties of six kinds of plantation wood
ZHANG Yu-ping,FU Feng. Preliminary research on bonding properties of six kinds of plantation wood[J]. Wood Processing Machinery, 2006, 17(4): 6-10
Authors:ZHANG Yu-ping  FU Feng
Abstract:The bonding properties of Chinese fir,Poplar,and other four kinds of Eucalyptus wood were studied in this paper.The results showed that Chinese fir,Poplar,Eucalyptus grandis and Eucalyptus urophylla xE.grandis had good bonding performance with higher glued shearing strength and wood failure.While the lower glued shearing strength and wood failure showed that it's necessary to improve the gluability of Eucalyptus citriodora and Eucalyptus exserta.At the same time,there was a significant difference among the four kinds of resin.The shearing strength of API and PF was higher than that of PVAc and UF,and the dispersion of shearing strength and wood failure of API and PVAc was better than that of PF and UF.
Keywords:plantation wood  gluability
本文献已被 CNKI 维普 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号