| 锅炉吹灰器枪管环缝焊接机床的设计 |
| |
| 引用本文： | 吴丰顺,胡炎祥,张伟刚,王磊,燕海潮,熊辉,邹树仿. 锅炉吹灰器枪管环缝焊接机床的设计[J]. 电焊机, 2005, 35(12): 29-31 |
| |
| 作者姓名： | 吴丰顺 胡炎祥 张伟刚 王磊 燕海潮 熊辉 邹树仿 |
| |
| 作者单位： | 1. 华中科技大学,材料学院,湖北,武汉,430074
2. 湖北戴蒙德电力机械有限公司,湖北,武汉,431800 |
| |
| 摘 要： | 介绍了锅炉吹灰器枪管环缝焊接机床的基本组成和工艺过程，设计了基于可编程控制器的电气控制系统和软件系统。该焊接机床由机械系统、电气系统、气动装置和水冷系统组成。可编程控制器是机床控制系统的核心，能够时机床的外围设备展开精确控制，这些外围设备包括：弧压控制器、焊接电源、送丝机控制器、电动机和电磁阀等。实验表明，使用该焊接设备焊接质量显著提高，焊工劳动强度大大降低。
|
| 关 键 词： | 可编程控制器 梯形图 锅炉吹灰器 枪管 |
| 文章编号： | 1001-2303(2005)12-0029-03 |
| 收稿时间： | 2005-04-30 |
| 修稿时间： | 2005-08-29 |
Design of encircling welding lathe for boiler sootblower''''s pipe |
| |
| WU Feng-shun,HU Yan-xiang,ZHANG Wei-gang,WANG Lei,YAN Hai-chao,XIONH Hui,ZHOU Shu-fang. Design of encircling welding lathe for boiler sootblower''''s pipe[J]. Electric Welding Machine, 2005, 35(12): 29-31 |
| |
| Authors: | WU Feng-shun HU Yan-xiang ZHANG Wei-gang WANG Lei YAN Hai-chao XIONH Hui ZHOU Shu-fang |
| |
| Affiliation: | 1. Huazhong University of Science and Technology, Wuhan 430074, China; 2. Diamond Power Machine (Hubei |
| |
| Abstract: | The technological process and the basic construction of a encircling weld lathe for boiler sootblower's pipe are described in this paper.An electrical control system and software system based on the programmable logic controller(PLC)was designed.The lathe was manufactured by integrating the machine system,electrical system,pneumatic device and water cooling system.PLC is the core of the entire control system,which control the peripheral equipment exactly.The peripheral equipment include arc voltage controller,weld power supply,wire feeder controller,electromotor and electromagnetic valve.The experiments show that,the weld quality is highly improved,physical labor of the welder is greatly decreased,when using this equipment. |
| |
| Keywords: | PLC ladder diagram boiler sootblower pipe |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
