| 基于过程能力和成本的刀具策略研究 |
| |
| 引用本文： | 张敏,何桢,崔庆安. 基于过程能力和成本的刀具策略研究[J]. 机械科学与技术, 2006, 25(9): 1059-1061,1091 |
| |
| 作者姓名： | 张敏 何桢 崔庆安 |
| |
| 作者单位： | 天津大学,管理学院,工业工程系,天津,300072;天津大学,管理学院,工业工程系,天津,300072;天津大学,管理学院,工业工程系,天津,300072 |
| |
| 摘 要： | 由于刀具磨损过程存在趋势项,传统的过程能力指数将变得不可靠。本文使用刀具磨损过程的能力指数,得到满足顾客要求的最小过程能力指数的换刀时刻。使用Bernste in概率密度函数描述刀具寿命和刀具磨损过程的一般特征,考虑质量损失、换刀成本、由于刀具的突然失效引发的惩罚成本及刀具的残留价值,结合过程能力和成本,提出了用于确定最佳刀具初始状态和换刀时刻的模型。在实际生产中,该模型提供了一种离线刀具管理方法。
|
| 关 键 词： | 刀具磨损 过程能力 初始状态 换刀时刻 |
| 文章编号： | 1003-8728（2006）09-1059-03 |
| 收稿时间： | 2005-09-07 |
| 修稿时间： | 2005-09-07 |
Tool Replacement Method Study Based on Process Capability and Cost |
| |
| Zhang Min,He Zhen,Cui Qingan. Tool Replacement Method Study Based on Process Capability and Cost[J]. Mechanical Science and Technology for Aerospace Engineering, 2006, 25(9): 1059-1061,1091 |
| |
| Authors: | Zhang Min He Zhen Cui Qingan |
| |
| Affiliation: | Department of Industrial Engineering, Tianjin University, Tianjin 300072 |
| |
| Abstract: | Due to the trends in tool wear processes,the use of traditional process capability indices becomes unreliable.The paper uses process capability indices for tool wear processes,from which the tool replacement time that meets the needs of customers for minimum process capability indices is obtained.The Bernstein probability density function is applied to describe the general characteristics of tool life and tool wear processes.The paper also presents a model for determining tools′ optimal initial settings and tool replacement time with regard to quality loss,replacement cost,penalty cost for sudden tool failure and salvage,which provides an off-line tool management method for production practices. |
| |
| Keywords: | tool wear process capability initial setting tool replacement time |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
