首页 | 本学科首页   官方微博 | 高级检索  
     

苏南500 kV UPFC工程电子式互感器现场试验
作者姓名:张弛  庞福滨  罗强  刘琛琛  汤汉松  孔祥平
作者单位:国网变电站智能设备检测技术重点实验室(国网江苏省电力有限公司电力科学研究院);江苏凌创电气自动化股份有限公司;国网南京供电公司;
基金项目:国家自然科学青年基金资助项目(51707090);国家电网有限公司科技项目"500 kV统一潮流控制器协调控制和保护配合技术研究
摘    要:为检验苏南500 kV UPFC工程现场的电子式互感器性能,对尚未正式投运的电子式互感器开展现场试验。提出了对电子式互感器的直流精度和阶跃响应性能进行测试的方法,使用自备的信号源产生一次电流信号,作为被测互感器和标准互感器的输入,使用互感器校验仪接收两者的输出并进行对比分析。结果表明,工程现场使用的电子式互感器性能良好,满足投运要求。同时,试验结果也证明了所用试验装置和方法的实用性,为后续进行系统的电子式互感器现场试验提供参考。

关 键 词:UPFC工程  电子式互感器  现场试验  直流精度  阶跃响应
收稿时间:2017/11/11 0:00:00
修稿时间:2017/12/20 0:00:00

Field Test of Electronic Transformers in Sunan 500 kV UPFC Project
Authors:ZHANG Chi  PANG Fubin  LUO Qiang  LIU Chenchen  TANG Hansong  KONG Xiangping
Affiliation:State Grid Key Laboratory of Substation Intelligent Equipment Testing Technology (State Grid Jiangsu Electric Power Co., Ltd. Research Institute), Nanjing 211103, China;Jiangsu Lingchuang Electric Automation Co., Ltd., Zhenjiang 212009, China;State Grid Nanjing Power Supply Company, Nanjing 210000, China
Abstract:Field tests are conducted on the electronic transformers in Sunan 500 kV UPFC project in order to examine their performance.Test equipment and method are presented referring to DC accuracy test and transient step test.A signal source is employed to produce primary current signal as the input of transformers to be tested and the standard transformer.A transformer tester is applied to receive the output signals of the two which are compared and analyzed accordingly.Test results show that performance of the transformers utilized in the project meet the requirements of operation.In addition,the test verifies the practicability of the equipment and the method.It can provide reference for further tests on the transformers.
Keywords:UPFC project  electronic transformers  field test  DC accuracy  step response
本文献已被 CNKI 等数据库收录!
点击此处可从《》浏览原始摘要信息
点击此处可从《》下载全文
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号