首页 | 本学科首页   官方微博 | 高级检索  
     

黄土地区非对称公路路堤稳定性分析
引用本文:郑俊杰,;孙玲,;周燕君,;牛玺荣. 黄土地区非对称公路路堤稳定性分析[J]. 土木工程与管理学报, 2014, 0(2): 7-11
作者姓名:郑俊杰,  孙玲,  周燕君,  牛玺荣
作者单位:[1]华中科技大学土木工程与力学学院,湖北武汉430074; [2]山西省交通科学研究院黄土地区公路建设与养护技术交通行业重点实验室,山西太原030006
摘    要:利用FLAC3D软件建立了非对称黄土公路路堤数值分析模型,在强度折减法的基础上,按M-C强度理论分析抗剪切强度参数内摩擦角和黏聚力对路堤稳定性的影响。通过对比不同加筋层数、筋土界面参数和荷载形式下加筋路堤的安全系数和剪应变增量云图,归纳总结出上述参数对路堤稳定性的影响规律。模拟结果表明:内摩擦角和黏聚力对路堤稳定性影响规律相似,安全系数和塑性贯通区均随剪切强度参数增大而增大。格栅加筋效果随着加筋层数和界面参数增大而增大,但增加幅度逐渐减小并最终趋于稳定。此外,非对称荷载作用下路堤稳定性较均布荷载的差。

关 键 词:强度折减法  安全系数  滑动面  筋土界面参数  荷载形式

Stability Analysis of Asymmetric Highway Embankment in Loess Areas
Affiliation:ZHENG Jun-jie, SUN Ling, ZHOU Yan-jun, NIU Xi-rong ( 1. School of Civil Engineering and Mechanics, Huazhong University of Science and Technology, Wuhan 430074, China; 2. Key Laboratory of Highway Construction and Maintenance Technology in Loess Region, Shanxi Transportation Research Institute, Taiyuan 030006, China)
Abstract:The asymmetric loess embankment was established by FDM software FLAC3D. The influence of internal friction angle and cohesion of embankment fill on the stability of embankment was analyzed by using the strength reduction method. Then, important factors that influence the stability of embankment, such as the layer of reinforcement, characteristics of reinforcement interface and form of load, had been analyzed in detail. Simulation results show that the influence of internal friction angle on the stability of embankment was similar to that of cohesion. The effect of reinforcement increased gradually with decreasing the increase rate as the layer of geogrid and characteristics of reinforcement interface increased. The stability of embankment under asymmetric traffic load was less than that under the uniform load case.
Keywords:strength reduction  safety factor  sliding surface  characteristics of reinforcement interface  load form
本文献已被 CNKI 维普 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号