首页 | 本学科首页   官方微博 | 高级检索  
     

接触式引弧方式在变极性TIG焊中的应用
引用本文:姚瑶,姚河清.接触式引弧方式在变极性TIG焊中的应用[J].电焊机,2017(11):56-59.
作者姓名:姚瑶  姚河清
作者单位:1. 长沙学院机电工程学院,湖南长沙,410003;2. 河海大学机电学院,江苏常州,213022
摘    要:在已搭建的双逆变变极性TIG焊接电源系统平台上,为保证电源的正常使用,设计了一种适用于变极性电源的TIG焊的接触式引弧方式,该方式将整个引弧过程分为接触阶段、维弧阶段和电流缓升三个阶段。接触阶段和维弧阶段的电流大小、电流变化速度都是可调节的。实验证明,该引弧方式不仅能应用于TIG焊变极性电源而且也适用于脉冲电源,并且有效避免了传统电源中接触式引弧常见的钨极烧损和电流过冲问题。

关 键 词:变极性  接触式引弧  钨极烧损

Application of touch arc ignition strategy for variable polarity TIG welding
Abstract:Based on variable polarity TIG welding power system platform in the dual inverter has been set up on the power supply,in order to ensure the normal use of the design,the contact type for a variable polarity power supply TIG welding arc,the whole process is divided into short circuit arc stage,arc stage and the current slow rise three stages.The current value and speed of the short stage and the main stage can be changed as needed.The experiments have proved that the arc ignition is suitable for not only the variety polarity source but also can apply on pulse current source,without any obvious tungsten weariness and arc extinguish,and the arc ignition success rate is quite high.
Keywords:variable polarity  touch arc ignition  tungsten weariness
本文献已被 CNKI 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号