| 基于Taguchi实验设计方法优化PoP的翘曲 |
| |
| 引用本文： | 颜学优,李国元. 基于Taguchi实验设计方法优化PoP的翘曲[J]. 桂林电子科技大学学报, 2009, 29(5) |
| |
| 作者姓名： | 颜学优 李国元 |
| |
| 作者单位： | 华南理工大学,电子与信息学院,广东,广州,510641 |
| |
| 摘 要： | 通过对PoP的翘曲进行优化分析,采用有限元分析方法分析了PoP中FBGA和PBGA的翘曲形变,并利用Taguchi设计和有限元模拟相结合的方法进行优化设计.分析结果表明:PBGA具有较大的翘曲,增加基板厚度和塑封料热膨胀系数,减小芯片大小和厚度可以改善PBGA的翘曲.对比优化前后的翘曲,在25 ℃时翘曲值从53.3 μm降到39.1 μm,260 ℃时翘曲值从-112 μm降到了-67.7 μm.塑封料热膨胀系数和芯片尺寸在优化翘曲中起着重要作用.
|
| 关 键 词： | 封装堆叠(PoP) Taguchi方法 翘曲 有限元分析 |
Optimization of warpage for package-on-package (PoP) assembly based on Taguchi method |
| |
| YAN Xue-you,LI Guo-yuan. Optimization of warpage for package-on-package (PoP) assembly based on Taguchi method[J]. Journal of Guilin University of Electronic Technology, 2009, 29(5) |
| |
| Authors: | YAN Xue-you LI Guo-yuan |
| |
| Affiliation: | YAN Xue-you,LI Guo-yuan (School of Electronic and Information Engineering,South China University of Technology,Guangzhou 510641,China) |
| |
| Abstract: | In the reflow process of package assembly,PoP warpage is an important factor affecting the reliability of the interconnect solder ball owing to the thermal mismatch between the package materials.This necessitates the optimization of the warpage for PoP.The warpage of FBGA and PBGA was analyzed by finite element analysis(FEA),and then optimization design was carried out for PBGA using Taguchi method and FEA simulation.Study results showed that PBGA had more serious warpage than FBGA,increase in thickness of ... |
| |
| Keywords: | Package-on-Package(PoP) Taguchi method warpage finite element analysis |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
|
