| 基于AUTOLISP的渐开线齿轮的设计 |
| |
| 引用本文： | 李艳,张海涛.基于AUTOLISP的渐开线齿轮的设计[J].北京印刷学院学报,2006,14(6):13-14. |
| |
| 作者姓名： | 李艳 张海涛 |
| |
| 作者单位： | 北京印刷学院,信息与机电工程学院,北京,102600;北京印刷学院,信息与机电工程学院,北京,102600 |
| |
| 摘 要： | 渐开线作为齿轮的齿廓非常广泛.在使用AUTOCAD绘制渐开线齿轮时,尽管AUTOCAD有很强的绘图功能,但其基本命令还是无法直接画出真实的渐开线.内嵌在AUTOCAD中的AUTOLISP语言是比较简单的,用AUTOLISP语言编制好的齿轮渐开线程序在AUTOCAD中加载和调用,就可以快速准确地绘制出渐开线圆柱齿轮的齿廓形状,再经过环形阵列和拉伸等操作就得到了完整的齿轮实体模型.
|
| 关 键 词： | 齿轮 渐开线 AUTOLISP 3DCAD AutoCAD |
| 文章编号： | 1004-8626(2006)06-0013-02 |
| 收稿时间： | 08 31 2006 12:00AM |
| 修稿时间： | 2006年8月31日 |
Designing an Involuted Gear Based on AUTOLISP |
| |
| LI Yan,ZHANG Hai-tao.Designing an Involuted Gear Based on AUTOLISP[J].Journal of Beijing Institute of Graphic Communication,2006,14(6):13-14. |
| |
| Authors: | LI Yan ZHANG Hai-tao |
| |
| Affiliation: | Beijing Institute of Graphic Communieation, Beijing 1026009 China |
| |
| Abstract: | An involuted gear is widely used in the application of gears. While designing an involuted gear by AutoCAD, although the drawing function of AutoCAD is powerful, it is unable to draw the involuted line directly by using its basic commands. AUTOLISP language, which is embedded in AutoCAD, is relatively simple. In AutoCAD, loading and transferring the compiled program can draw out the tooth profile of an involuted gear accurately and immediately; and then, the whole solid model of gears can be established by using some manipulations, such as an uniform circular array and draw, etc. |
| |
| Keywords: | AUTOLISP 3DCAD AutoCAD |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
