| 车削刀片切削性能试验方法研究 |
| |
| 引用本文： | 邓莹,邓玲. 车削刀片切削性能试验方法研究[J]. 工程与试验, 2012, 52(2): 44-48 |
| |
| 作者姓名： | 邓莹 邓玲 |
| |
| 作者单位： | 1. 重庆文理学院,重庆永川 402160;重庆市高校微纳米材料工程与技术重点实验室,重庆永川402160
2. 成都量具刃具股份有限公司,四川成都,610031 |
| |
| 摘 要： | 以YT15刀具对4Cr13模具钢车削加工为例,进行了切削性能分析和工艺试验,并根据试验结果,对YT15切削4Cr13模具钢的切削加工参数进行了优化,且在优化切削参数条件下,将不同厂家生产的YT15刀片车削4Cr13模具钢切削加工性能进行对比研究,最终得出刀具生产、开发和应用的参考依据。
|
| 关 键 词： | 车削刀片 切削性能 试验方法 |
Research on Test Methods for Cutting Performance of Turning Tool |
| |
| Deng Ying , Deng Ling. Research on Test Methods for Cutting Performance of Turning Tool[J]. ENGINEERING & TEST, 2012, 52(2): 44-48 |
| |
| Authors: | Deng Ying Deng Ling |
| |
| Affiliation: | 1.Chongqing University of Arts and Sciences,Chongqing402160,China ;2.Chongqing Key Laboratory of Micro /Nano Materials Engineering and Technology,Chongqing402160,China ;3.Chengdu Chengliang Co.,LTD.Chengdu610031,Sichuan,China) |
| |
| Abstract: | Taking the process of using YT15turning tool to cut 4Cr13mold steel as an example,the cutting performance is analyzed and process is tested.According to the test results,the cutting parameters are optimized.Base on the optimized cutting parameter,the cutting performance of using different YT15to cut 4Cr13is compared,which provides some references for tool production,development and application. |
| |
| Keywords: | Turning tool cutting performance test method |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
