| Two-way shape memory effect and alternating current driving characteristics of a TiNi alloy spring |
| |
| 作者姓名： | WANGZhiguo ZUXiaotao |
| |
| 作者单位： | DepartmentofAppliedPhysics,UniversityofElectronicScienceandTechnologyofChina,Chengdu610054,China |
| |
| 基金项目： | This project is financially supported by the National Natural Science Foundation of China (No. 10175042) |
| |
| 摘 要： | Two-way shape memory effect (TWSME) was induced into the TiNi shape memory alloys (SMAs) spring by thermomechanical training after annealing treatment, which has promising application in micro-actuating fields. The TWSME spring can contract upon heating and extend upon cooling. The results show that there is an increase of the recovery ratio up to a maximum TWSME of 45%. During the training procedure, transformation temperatures and hysteresis were measured by different scanning calorimetry (DSC). The results show that As (reverse transformation start temperature) and Af (reverse transformation fmish temperature) shift to lower temperature after training. The intervals of ArAs and Ms-Mf (Ms and Mf are the martensite start and finish temperatures, respectively) increase and the heat of transformation decreases after training. The electrothermal driving characteristics of the TWSME springs were also investigated with alternating current density of 3.2-14.7A/mm^2. It is found that the time response and the maximum contraction ratio greatly depend on the magnitude of the electrical current density.
|
| 关 键 词： | 电热驱动 热机训练 差示扫描量热法 交互电流驱动特性 形状记忆钛镍合金弹簧 双向形状记忆弹簧 微起动 |
Two-way shape memory effect and alternating current driving characteristics of a TiNi alloy spring |
| |
| WANGZhiguo ZUXiaotao.Two-way shape memory effect and alternating current driving characteristics of a TiNi alloy spring[J].Rare Metals,2004,23(3):250-254. |
| |
| Authors: | WANG Zhiguo ZU Xiaotao |
| |
| Affiliation: | Department of Applied Physics, University of Electronic Science and Technology of China, Chengdu 610054, China |
| |
| Abstract: | Two-way shape memory effect (TWSME) was induced into the TiNi shape memory alloys (SMAs) spring by thermomechanical training after annealing treatment, which has promising application in micro-actuating fields. The TWSME spring can contract upon heating and extend upon cooling. The results show that there is an increase of the recovery ratio up to a maximum TWSME of 45%. During the training procedure, transformation temperatures and hysteresis were measured by different scanning calorimetry (DSC). The results show that A_s (reverse transformation start temperature) and A_f (reverse transformation finish temperature) shift to lower temperature after training. The intervals of A_f-A_s and M_s-M_f (M_s and M_f are the martensite start and finish temperatures, respectively) increase and the heat of transformation decreases after training. The electrothermal driving characteristics of the TWSME springs were also investigated with alternating current density of 3.2-14.7 A/mm~2. It is found that the time response and the maximum contraction ratio greatly depend on the magnitude of the electrical current density. |
| |
| Keywords: | metallic materials two-way shape memory spring thermomechanical training different scanning calorimetry (DSC) electrothermal driving |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
