| 油雾再利用喷嘴及切削试验研究 |
| |
| 引用本文： | 严鲁涛,袁松梅,刘强.油雾再利用喷嘴及切削试验研究[J].润滑与密封,2009,34(3). |
| |
| 作者姓名： | 严鲁涛 袁松梅 刘强 |
| |
| 作者单位： | 北京航空航天大学机械工程及自动化学院,北京,100083 |
| |
| 基金项目： | 国家科技支撑计划重点项目 |
| |
| 摘 要： | 提出利用喷嘴的真空效应回收和利用切削加工过程中油雾润滑产生的雾粒.分析和测试了喷嘴的真空特性,设计了一套基于喷嘴油雾回收系统.采用传统切削、干切削、微量润滑切削以及配有真空回收的微量润滑系统切削对高强度钢(PCrNi3Mo)进行切削试验,结果表明,基于喷嘴的真空回收系统不仅可以降低工作区的油雾量,还可将油雾重复利用并使切削性能得到进一步提高.
|
| 关 键 词： | 微量润滑 重复利用 真空特性 切削性能 |
Experimental Research on Oil Mists Recycle Nozzle |
| |
| Yan Lutao,Yuan Songmei,Liu Qiang.Experimental Research on Oil Mists Recycle Nozzle[J].Lubrication Engineering,2009,34(3). |
| |
| Authors: | Yan Lutao Yuan Songmei Liu Qiang |
| |
| Affiliation: | School of Mechanical Engineering and Automation;Beihang University;Beijing 100083;China |
| |
| Abstract: | A method of using vacuum characteristic of a nozzle to reuse the oil mist generated during machining operation was put forward.The vacuum characteristic of a nozzle was analyzed and measured,the recycle system with nozzles was designed.The cutting performance of traditional cutting,dry machining,minimal quality lubrication cutting and the cutting of minimal quality lubrication with recycle system in the milling of high strength steel(PCrNi3Mo) was discussed.The experimental results show that the recycle sys... |
| |
| Keywords: | minimal quality lubrication reuse vacuum characteristic machinability |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
