首页 | 本学科首页   官方微博 | 高级检索  
     

单相电压型PWM整流器无源控制算法研究
引用本文:张智俊.单相电压型PWM整流器无源控制算法研究[J].测控技术,2018,37(2):147-150.
作者姓名:张智俊
作者单位:安徽理工大学电气与信息工程学院,安徽淮南,232001
基金项目:国家自然科学基金资助项目(61170060);安徽省学术和技术带头人及后备人选学术科研活动资助项目(2015D046);安徽省教育厅高校优秀拔尖人才培育资助项目(gxbjZD2016044)
摘    要:以单相电压型PWM整流器为研究对象,针对其控制策略和控制性能不佳等问题,提出由无源电流控制器控制的单相电压型PWM整流器无源控制算法.首先,构建虚拟d-q坐标系获得整流器输入电流的d-q轴电流分量;其次,通过无源电流控制器消除或抑制输入电流谐波,实现对d-q轴电流分量的无差跟踪,使得整流器输出恒定的直流电压;最后,引入评价函数,对控制器的开关函数进行最优选取,从而选择最优开关状态.仿真和实验结果表明,该方法较传统的PI控制算法具有更高的准确性和有效性.

关 键 词:单相电压型PWM整流器  无源电流控制算法  d-q轴电流  无差跟踪  评价函数  single-phase  voltage  source  PWM  rectifiers  passivity  current  control  algorithm  d-q  coordinate  current  no-error  following  evaluation  function

Research on Passivity Control Algorithm of Single-Phase Voltage Source PWM Rectifiers
ZHANG Zhi-jun.Research on Passivity Control Algorithm of Single-Phase Voltage Source PWM Rectifiers[J].Measurement & Control Technology,2018,37(2):147-150.
Authors:ZHANG Zhi-jun
Abstract:A passivity based control algorithm is presented for single-phase voltage PWM rectifier which has poor control strategy and performance and other issues.Firstly,the virtual d-q coordinate system was constructed to obtain the d-q axis current component of the rectifier input current so that the input current harmonics can be eliminated or suppressed through the passive current controller.Then,the no-error following of d-q axis current component could be achieved and the rectifier outputed a constant DC voltage.Finally,the evaluation function was introduced to optimize the switching function of the controller,so as to select the optimal switching state.Simulation and experimental results show that this method is more accurate and effective than the traditional PI control algorithm.
Keywords:single-phase voltage source PWM rectifiers  passivity current control algorithm  d-q coordinate current  no-error following  evaluation function
本文献已被 万方数据 等数据库收录!
点击此处可从《测控技术》浏览原始摘要信息
点击此处可从《测控技术》下载全文
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号