| V型毛细微沟槽犁切-挤压成形试验研究 |
| |
| 引用本文： | 陈志斌,汤勇,池勇.V型毛细微沟槽犁切-挤压成形试验研究[J].工具技术,2007,41(6):71-74. |
| |
| 作者姓名： | 陈志斌 汤勇 池勇 |
| |
| 作者单位： | 1. 华南理工大学机械工程学院现代制造工程研究所,510640,广州市
2. 华南理工大学,510640,广州市 |
| |
| 摘 要： | 采用犁切—挤压一次成形加工工艺,在0.5mm厚的铜带表面加工出V形毛细微沟槽结构。对所加工的V型微沟槽进行电镜扫描,观察其特征,并用显微镜测量其几何参数。分析了不同加工参数和刀具结构参数对沟槽翅高和槽深度的影响。研究结果表明:在V型微沟槽成形过程中,受到加工参数和刀具结构参数的联合影响。
|
| 关 键 词： | V型微沟槽 犁切—挤压 翅高 槽深 |
| 修稿时间： | 2006年10月1日 |
Experiment Research of Tiny V Form Groove Plough-extrusion Formation |
| |
| Chen Zhibin,Tang yong,Chi yong.Experiment Research of Tiny V Form Groove Plough-extrusion Formation[J].Tool Engineering(The Magazine for Cutting & Measuring Engineering),2007,41(6):71-74. |
| |
| Authors: | Chen Zhibin Tang yong Chi yong |
| |
| Abstract: | The plough-extrusion direct forming technology is proposed to machine different tiny V form grooves in the copper surface.The copper's thickness is 0.5 mm.The characteristic of the tiny V form grooves is observed with SEM,and its geometry parameter is measured with microscope.The effects of different machining parameters and structure parameters to fin height and groove depth are analyzed.The experimental results show that a tiny V form groove formation process is affected associated by the machining parameter and the structure parameter. |
| |
| Keywords: | V form tiny groove plough-extrusion fin height groove depth |
| 本文献已被 维普 万方数据 等数据库收录！ |
|
