首页 | 本学科首页   官方微博 | 高级检索  
     

高速淹没冲击射流的压强特性
引用本文:田忠,许唯临,王 韦,刘善均.高速淹没冲击射流的压强特性[J].水利学报,2005,36(4):0401-0404.
作者姓名:田忠  许唯临  王 韦  刘善均
作者单位:四川大学,高速水力学国家重点实验室,四川,成都,610065
基金项目:高速水力学国家重点实验室开放基金(0102)
摘    要:在试验室中研究了高速淹没射流对挡板的冲击压强特性。射流出流速度为10.36m/s~53.86m/s、厚度为3cm。测得最大时均冲击压强沿射流流程的变化规律以及挡板上的时均冲击压强的分布特性及扩散宽度。试验结果表明:在高流速范围内,挡板上的最大时均无量纲冲击压强与无量纲射流流程的平方根之间存在良好的直线关系。当射流流程大于80倍出流厚度时,淹没射流产生的冲击压强可以忽略。挡板上的时均压强分布存在较好的自模性,近似符合高斯分布。最后给出了挡板冲击区宽度的定量描述。

关 键 词:高速射流  冲击压强  淹没射流  实验研究
文章编号:0559-9350(2005)04-0401-04
修稿时间:2004年4月14日

Experimental study on impinging pressure caused by high velocity submerged jet
TIAN Zhong,XU Wei-lin,WANG Wei,LIU Shan-jun.Experimental study on impinging pressure caused by high velocity submerged jet[J].Journal of Hydraulic Engineering,2005,36(4):0401-0404.
Authors:TIAN Zhong  XU Wei-lin  WANG Wei  LIU Shan-jun
Affiliation:Sichuan University, Chengdu 610065, China
Abstract:The characteristics of impinging pressure acting on vertical plate caused by high velocity submerged jet are experimentally studied. The emergence velocity of the jet is ranging from 10.3m/s to 53.86m/s, and the thickness of the jet is 3.0cm. The result shows that the maximum impinging pressure varies linearly with the square root of the jet distance and the pressure can be neglected as the distance exceeds 80 times of the jet thickness. The pressure distributions on the plate are self-similar and following the Gauss distribution law.
Keywords:experimental study  impinging pressure  high velocity  submerged jet
本文献已被 CNKI 维普 万方数据 等数据库收录!
点击此处可从《水利学报》浏览原始摘要信息
点击此处可从《水利学报》下载全文
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号