Pilot plant study of post-combustion carbon dioxide capture by reactive absorption: Methodology, comparison of different structured packings, and comprehensive results for monoethanolamine

Post-combustion carbon capture (PCC) from fossil fuel power plants by reactive absorption can substantially contribute to reduce emissions of the greenhouse gas CO₂. To test new solvents for this purpose small pilot plants are used. The present paper describes results of comprehensive studies of the standard PCC solvent MEA (0.3 g/g monoethanolamine in water) in a pilot plant in which the closed cycle of absorption/desorption process is continuously operated (column diameters: 0.125 m, absorber/desorber packing height: 4.25/2.55 m, packing type: Sulzer BX 500, flue gas flow: 30-110 kg/h, CO₂ partial pressure: 35-135 mbar). The data establish a base line for comparisons with new solvents tested in the pilot plant and can be used for a validation of models of the PCC process with MEA. The ratio of the solvent to the flue gas mass flow is systematically varied at constant CO₂ removal rate, and CO₂ partial pressure in the flue gas. Optimal operating points are determined. In the present study the structured packing Sulzer BX 500 is used. The experiments with the removal rate variation are carried out so that the results can directly be compared to those from a previous study in the same plant that was carried out using Sulzer Mellapak 250.Y. A strategy for identifying the influence of absorption kinetics on the results is proposed, which is based on a variation of the gas load at a constant L/G ratio and provides valuable insight on the transferability of pilot plant results.