| 注射器活塞管注射模设计 |
| |
| 引用本文： | 翟林. 注射器活塞管注射模设计[J]. 模具工业, 2010, 36(6): 59-61 |
| |
| 作者姓名： | 翟林 |
| |
| 作者单位： | 天津轻工职业技术学院,天津,300380 |
| |
| 摘 要： | 分析了注射器活塞管的工艺特点,介绍了注射模结构及工作过程。模具结构设计合理,操作方便,使用寿命长,塑件达到技术要求。
|
| 关 键 词： | 活塞管 注射模 抽芯 液压缸 |
Design of injection mould for syringe piston tube |
| |
| ZHAI Lin. Design of injection mould for syringe piston tube[J]. Die & Mould Industry, 2010, 36(6): 59-61 |
| |
| Authors: | ZHAI Lin |
| |
| Affiliation: | ZHAI Lin(Tianjin Light Industry Vocational Technical College,Tianjin 300380,China) |
| |
| Abstract: | The process characteristic of the plastic piston tube of an injection syringe was analyzed.The structure and work process of an injection mould for the forming was developed. |
| |
| Keywords: | piston tube injection mould core pulling cylinder |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
