| 折弯机滑块的有限元分析及优化 |
| |
| 引用本文： | 谈传明,张子东,曹光荣,王志明,刘进,李峰,刘冲. 折弯机滑块的有限元分析及优化[J]. 锻压装备与制造技术, 2011, 0(6): 37-40 |
| |
| 作者姓名： | 谈传明 张子东 曹光荣 王志明 刘进 李峰 刘冲 |
| |
| 作者单位： | 1. 江苏亚威机床股份有限公司,江苏江都,225200
2. 南京理工大学机械工程学院,江苏南京,210094 |
| |
| 摘 要： | 为了建立统一的折弯机建模分析方法,形成亚威公司主要折弯机机型的刚性数据,便于设计人员掌握和精度分析.本文利用CosmosWorks分析软件,在分析折弯机滑块工作及受力情况的墓础上,建立滑块的有限元模型,进行仿真分析,找出结构中的薄弱环节,对其进行优化设计,最终确定优化方案.
|
| 关 键 词： | 机械制造 滑块 折弯机 设计优化 有限元 |
The finite element analysis and optimization of slider on press brake |
| |
| TAN Chuanming , ZHANG Zidong , CAO Guangrong , WANG Zhiming , LIU Jin , LI Feng , LIU Chong. The finite element analysis and optimization of slider on press brake[J]. China Metalforming Equipment & Manufacturing Technology, 2011, 0(6): 37-40 |
| |
| Authors: | TAN Chuanming ZHANG Zidong CAO Guangrong WANG Zhiming LIU Jin LI Feng LIU Chong |
| |
| Affiliation: | 1(1.Yawei Machine Tool Co.,Ltd.,Jiangdu 225200,Jiangsu China;2.Nanjing University of Science and Technology,Nanjing 210094,Jiangsu China) |
| |
| Abstract: | With the help of CosmosWorks analysis software,by analysis of working and forcing situation of slider on press brake,the finite element model of the slider has been established and analyzed in the text.The weak points have been found out and optimized from the result of the simulation analysis.Finally,the optimized solution has been determined. |
| |
| Keywords: | Slider Press brake Optimization of design The Finite Element |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
|
