| 成型工艺对粘结NdFeB磁体力学性能的影响 |
| |
| 引用本文： | 张修海,熊惟皓,李燕芳,宋妮. 成型工艺对粘结NdFeB磁体力学性能的影响[J]. 电子元件与材料, 2008, 27(5): 15-18 |
| |
| 作者姓名： | 张修海 熊惟皓 李燕芳 宋妮 |
| |
| 作者单位： | 华中科技大学,材料成型与模具技术国家重点实验室,湖北,武汉,430074 |
| |
| 摘 要： | 用模压成型方法制备了粘结NdFeB磁体,通过对磁体密度、抗弯强度和抗压强度的分析,研究了A、B和C三种成型工艺对磁体力学性能的影响。结果表明:工艺B制备的磁体密度最大,磁性能最好;工艺C制备的磁体力学性能最好且制备成本低,生产效率高,适合大批量工业化生产;工艺C制备的磁体,620MPa成型压力和160℃固化温度使磁体获得最优的力学性能,其抗弯强度、抗压强度分别达到了76.63,154.63MPa。
|
| 关 键 词： | 电子技术 粘结NdFeB磁体 成型工艺 密度 力学性能 |
| 文章编号： | 1001-2028(2008)05-0015-04 |
| 修稿时间： | 2008-01-09 |
Effect of forming technology on mechanical properties of bonded NdFeB magnet |
| |
| ZHANG Xiu-hai,XIONG Wei-hao,LI Yan-fang,SONG Ni. Effect of forming technology on mechanical properties of bonded NdFeB magnet[J]. Electronic Components & Materials, 2008, 27(5): 15-18 |
| |
| Authors: | ZHANG Xiu-hai XIONG Wei-hao LI Yan-fang SONG Ni |
| |
| Affiliation: | ZHANG Xiu-hai,XIONG Wei-hao,LI Yan-fang,SONG Ni (State Key Laboratory of Material Processing , Die & Mould Technology,Huazhong University of Science , Technology,Wuhan 430074,China) |
| |
| Abstract: | Bonded NdFeB magnets were prepared by method of compression molding. The effect of forming technology on its mechanical properties was studied through the analysis of density, bending strength and compressive strength of bonded magnets. The results show that the densities and magnetic properties of the magnets on forming technology B are highest while the mechanical properties of the magnets on forming technology C are highest, The forming technology C is fit to volume industrialization produce because its ... |
| |
| Keywords: | electron technology bonded NdFeB magnet forming technology density mechanical property |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
|
