| 17CrNiMo6钢渗碳淬火畸变特性及其控制的研究 |
| |
| 引用本文： | 李宝奎,王爱香,赵少甫,顾敏,朱全意.17CrNiMo6钢渗碳淬火畸变特性及其控制的研究[J].热处理技术与装备,2007,28(2):36-38,43. |
| |
| 作者姓名： | 李宝奎 王爱香 赵少甫 顾敏 朱全意 |
| |
| 作者单位： | 郑州机械研究所,河南,郑州,450052 |
| |
| 摘 要： | 采用正交试验方法,研究了预处理、渗碳温度、碳势、淬火温度及预热等材料和热处理工艺因素对17CrNiMo6钢热处理畸变的影响.针对17CrNiMo6钢渗碳淬火的畸变特性,可通过优化的工艺参数较好地控制17CrNiMo6钢的畸变.
|
| 关 键 词： | 17CrNiMo6 正交试验 渗碳淬火 热处理畸变 |
| 文章编号： | 1673-4971（2007）02-0036-03 |
| 修稿时间： | 2006-12-04 |
Study on the Distortion Characteristic of 17CrNiMo6 Steel during Carburizing and Hardening Process and Its Control |
| |
| LI Bao-kui,WANG Ai-xiang,ZHAO Shao-fu,GU Min,ZHU Quan-yi.Study on the Distortion Characteristic of 17CrNiMo6 Steel during Carburizing and Hardening Process and Its Control[J].Heat Treatment Technology and Equipment,2007,28(2):36-38,43. |
| |
| Authors: | LI Bao-kui WANG Ai-xiang ZHAO Shao-fu GU Min ZHU Quan-yi |
| |
| Affiliation: | Zhengzhou Research Institute of Mechanical Engineering, Zhengzhou Heiaan 450052, China |
| |
| Abstract: | Effects of material and technology factors including pre-treatment, carburizing temperature, carbon potential, quenching temperature and preheating etc. on the heat treatment distortion of 17CrNiMo6 steel were studied by orthogonal test. According to the distortion characteristic of 17CrNiMo6 steel during carburizing and hardening process, the distortion of 17CrNiMo6 steel will be controled preferably through optimized technological parameters. |
| |
| Keywords: | 17CrNiMo6 orthogonal test carburizing and hardening heat treatment distortion |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
