| 壶体注塑模设计 |
| |
| 引用本文： | 阳湘安,张翔. 壶体注塑模设计[J]. 现代制造工程, 2005, 0(12): 77-78 |
| |
| 作者姓名： | 阳湘安 张翔 |
| |
| 作者单位： | 1. 广东技术师范学院,广州,510641
2. 北京现代汽车有限公司,北京,101300 |
| |
| 摘 要： | 在注塑模具中分型面的设计将直接影响模具的复杂程度和制造成本,并对产品的质量产生影响。以PRO/MOLD-ESIGN软件包为工具,通过对电热壶体的结构和工艺性分析,较详细地论述了电热壶体模具分型面的设计,并阐述了在PRO/MOLDESIGN上快速生成模具型芯、型腔的方法。
|
| 关 键 词： | Pro/E PRO/MOLDESIGN 分型面 注塑模具 电热壶体 |
| 文章编号： | 1671-3133(2005)12-0077-02 |
| 修稿时间： | 2005-03-15 |
Design of the injection mold for the body of electric kettle |
| |
| Yang Xiangan,Zhang Xiang. Design of the injection mold for the body of electric kettle[J]. Modern Manufacturing Engineering, 2005, 0(12): 77-78 |
| |
| Authors: | Yang Xiangan Zhang Xiang |
| |
| Affiliation: | Yang Xiangan~1,Zhang Xiang~2 |
| |
| Abstract: | The design of parting surface will make great ef fect to the complexity and the cost of injection mould.Have introduced the eleme nts which considered in designing the parting surface through the analysis of th e structure and technological property of the electric kettle,on the other hand, the method for rapidly generating the core and cavity of the injection mold on P RO/MOLDESIGN is stated. |
| |
| Keywords: | Pro/E PRO/MOLDESIGN Parting surface Injection mould El ectric kettle body |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
