| Abstract: | The surface properties of cellulose fibers have been modified by heat treatment, by silane coupling agents, and by maleated polypropylene grafts. The effectiveness of these methods has been evaluated by electron spectroscopy (ESCA), by contact angle measurements, and by inverse gas chromatography. The latter analyses yielded information on the fibers' acid/base interaction potential. Cellulose was found to be amphoteric, with prevalent acidic properties. Heat and chloro-silane treatments accentuated acidity, while amino-silane treatment produced net basicity in the fiber surface. Modification with maleated polypropylene reduced specific interactions and converted the fiber to a predominantly dispersion-force solid. The modified fibers were used in composites with polypropylene (neutral), polystyrene (base), and chlorinated polyethylene (acid) as matrix. Stress/strain and dynamic mechanical parameters were found to vary with acid/base interactions between polymer and fiber, significant improvements being noted in elastic and storage moduli, in tensile strength and elongation. In polypropylene, properties were unaffected by acid/base considerations. Acid/base forces, not necessarily dominant, merit consideration in the design of surface modification strategies intended to optimize composite mechanical properties. |
