|
|||||
|
|
Improving the hydrophilicity of polyethersulfone membrane by the combination of grafting technology and reverse thermally induced phase separation method |
|
| Authors: | Hang Yang Chun-Mei Gao Sheng-Hui Liu Shi-Feng Ji Hong-Yu Chen Jin-Chao Chen |
| Affiliation: | 1. Department of Environmental Engineering, College of Marine Ecology and Environment, Shanghai Ocean University, Shanghai, China;2. Department of Environmental Engineering, College of Marine Ecology and Environment, Shanghai Ocean University, Shanghai, China
Center for Polar Research, Shanghai Ocean University, Shanghai, China Marine Environment Monitoring and Assessment Center, Shanghai Ocean University, Shanghai, China;3. Department of Environmental Engineering, College of Marine Ecology and Environment, Shanghai Ocean University, Shanghai, China Marine Environment Monitoring and Assessment Center, Shanghai Ocean University, Shanghai, China |
| Abstract: | In this work, surface grafting modification technology was combined with reverse thermally induced phase separation (RTIPS) method in order to improve the structure and permanent hydrophilicity of polyethersulfone (PES) membranes. Acrylic solution with different concentrations was grafted on the surface of PES membranes while grafting temperature and grafting time were also varied. The modified PES membranes were characterized in all aspects. Attenuated total reflectance Fourier transform-infrared confirmed successful modification of the PES membrane by grafting acrylic acid. Scanning electron microscopy revealed that homogeneous porous top surface as well as spongy-like cross-section structure appeared in the membrane by RTIPS procedure. Moreover, porosity was affected by changes of acrylic acid concentration, grafting temperature, and grafting time. Atomic force microscopy showed that grafting acrylic acid gave a reduction in roughness of PES membrane. Combined with the decreased values of contact angle, the hydrophilicity and antifouling performance of the PES membrane were improved. The pure water flux and BSA rejection rate of the grafted PES membranes were remarkably improved for pure PES membrane and attained a maximum, which was 1,646.24 L/(m2h) and 94.5%, respectively. The long-term test demonstrated that grafting membranes exhibited outstanding elevated water flux recovery ratio (>85%). |
| Keywords: | antifouling membrane grafting technology hydrophilicity reverse thermally induced phase separation (RTIPS) method |