Impact of the wet spinning parameters on the alpaca-based polyacrylonitrile composite fibers: Morphology and enhanced mechanical properties study

The study examined the effect of different wet spinning parameters (e.g., total solid content, coagulation bath concentration, drawing, and stretching) on the morphology and mechanical properties of the wet spun alpaca/polyacrylonitrile (PAN) composite fibers. The alpaca/PAN composite fibers were wet spun using 10, 20, and 30% of alpaca particles along with the PAN polymer. The shear-thinning or non-Newtonian flow behavior was observed among the dope solutions with different solid content. The cross-sectional fiber morphology showed the bean-shaped characteristic for the control PAN fibers, whereas the alpaca/PAN composite fibers exhibited almost circular shape. “Cavity healing” was observed, where noticeable voids and porous areas were demolished in the cross section of the composite fibers, by changing the total solid content and coagulation bath concentration. Although the control PAN fibers exhibited the highest tenacity with lower fiber diameter, the alpaca/PAN composite fibers showed a gradual deterioration in tenacity while adding alpaca particles into the PAN polymeric matrix. Nevertheless, due to the increment in the total solid content, higher draw ratio, and stretching of the fibers, the tenacity, molecular orientation, and the crystallinity of the composite fibers were increased.