| 工件材料的各向异性对超精密切削变形及已加工表面粗糙度的影响 |
| |
| 引用本文： | 周明,李荣彬,袁哲俊.工件材料的各向异性对超精密切削变形及已加工表面粗糙度的影响[J].机械工程学报,1997(3). |
| |
| 作者姓名： | 周明 李荣彬 袁哲俊 |
| |
| 作者单位： | 哈尔滨工业大学机械工程系(周明)，香港理工大学(李荣彬)，哈尔滨工业大学(袁哲俊) |
| |
| 摘 要： | 研究了单晶铜超精密切削时，工件材料的晶体取向对切削变形及表面质量的影响。切削试验结果表明，剪切角、切削力，表面粗糙度随晶体切削方向的不同而有明显的变化。根据超精密切削中切屑形成过程的晶体塑性力学模型，分析了剪切角与切削力随晶体取向的变化规律。理论分析结果与试验结果相符。
|
| 关 键 词： | 晶体切削方向，超精密切削，剪切角，切削力 |
INFLUENCE OF WORKPICECE MATERIAL ANISOTROPY ONCUTTING DEFORMATION AND MACHINED SURFACEROUGHNESS IN ULTRAPRECISION MACHINING |
| |
| Zhou,Ming.INFLUENCE OF WORKPICECE MATERIAL ANISOTROPY ONCUTTING DEFORMATION AND MACHINED SURFACEROUGHNESS IN ULTRAPRECISION MACHINING[J].Chinese Journal of Mechanical Engineering,1997(3). |
| |
| Authors: | Zhou Ming |
| |
| Affiliation: | Zhou Ming(Harbin Institute of Technology)Lee WB Yuan Zhejun(Hong Kong Polytecdnic University) (Harbin Institute of Technology)) |
| |
| Abstract: | The effcet of crystallographic orientations of the wordpiece material on cutting deformation and machinedsurface quality in diamond cutting of single crystal copper is studied .The experimental results show that the shearangle ,the cutting force and the machined surface roughness vary considerably with the crystallographic cuttingdirection. The trend in the variation of shear angles and cutting forces is analyzed based on a microplasticity model ofchip formation.Analytical results compare well with the experimental data. |
| |
| Keywords: | Crystallographic cutting direction Ultraprecision machining Shear angle Cutting force |
| 本文献已被 CNKI 等数据库收录！ |
