首页 | 本学科首页   官方微博 | 高级检索  
     

多孔泡沫陶瓷中预混火焰燃烧速率的试验研究
引用本文:吕兆华 Matt.,RD.多孔泡沫陶瓷中预混火焰燃烧速率的试验研究[J].燃烧科学与技术,1995,1(2):129-134.
作者姓名:吕兆华 Matt.  RD
作者单位:南京理工大学
摘    要:本文对在多孔泡沫陶瓷中的甲烷/空气预混燃烧的燃速特性进行了实验研究,用一专用燃烧器对两种材质不同孔径尺寸的多孔介质分别测定了它们的预混燃烧速率。所得结果表明,其燃速与层流无多孔介质的自由火焰相比有显著的提高,并且受到材质和孔径大小的影响。同时,当量皆可燃稳定上下界限也有相应扩大。

关 键 词:陶瓷燃烧器  多孔介质  火焰  预混燃烧  燃烧性能

Experimental Study of Premixed Burning Rate within Porous Ceramics
Lu Zhaohua, Sun Sicheng, Pei Jinhua.Experimental Study of Premixed Burning Rate within Porous Ceramics[J].Journal of Combustion Science and Technology,1995,1(2):129-134.
Authors:Lu Zhaohua  Sun Sicheng  Pei Jinhua
Abstract:An experimental study of premixed methane-air combustion was conducted on the burning rate characteristics within porous ceramic foams. A specially-designed burner was used to measure the burning rate for two types of porous ceramics, with three different pore sizes for each foam respectively. The results showed that burning speeds were well in excess of the laminar, free flame speeds, and were affected by material properties and pore sizes. The stability limits in equivalence ratio were extended as compared to those of the free flame without porous media.
Keywords:Premixed combustion  Burner  Porous media
本文献已被 CNKI 维普 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号