A Thermodynamic Model of Phosphorus Distribution Ratio between CaO-SiO2-MgO-FeO-Fe2O3-MnO-Al2O3-P2O5 Slags and Molten Steel during a Top–Bottom Combined Blown Converter Steelmaking Process Based on the Ion and Molecule Coexistence Theory |
| |
Authors: | Xue-Min Yang Jian-Ping Duan Cheng-Bin Shi Meng Zhang Yong-Liang Zhang and Jian-Chang Wang |
| |
Affiliation: | (1) State Key Laboratory of Multiphase Complex Systems, Institute of Process Engineering, Chinese Academy of Sciences, Beijing, 100190, P. R. China;(2) Technology Center, Shanxi Taigang Stainless Corporation Limited, Taiyuan, 030003, P. R. China;(3) School of Metallurgical and Ecological Engineering, University of Science and Technology Beijing, Beijing, 100083, P. R. China |
| |
Abstract: | A thermodynamic model for calculating the phosphorus distribution ratio between top–bottom combined blown converter steelmaking
slags and molten steel has been developed by coupling with a developed thermodynamic model for calculating mass action concentrations
of structural units in the slags, i.e., CaO-SiO2-MgO-FeO-Fe2O3-MnO-Al2O3-P2O5 slags, based on the ion and molecule coexistence theory (IMCT). Not only the total phosphorus distribution ratio but also
the respective phosphorus distribution ratio among four basic oxides as components, i.e., CaO, MgO, FeO, and MnO, in the slags and molten steel can be predicted theoretically by the developed IMCT phosphorus distribution
ratio prediction model after knowing the oxygen activity of molten steel at the slag–metal interface or the Fe
t
O activity in the slags and the related mass action concentrations of structural units or ion couples in the slags. The calculated
mass action concentrations of structural units or ion couples in the slags equilibrated or reacted with molten steel show
that the calculated equilibrium mole numbers or mass action concentrations of structural units or ion couples, rather than
the mass percentage of components, can present the reaction ability of the components in the slags. The predicted total phosphorus
distribution ratio by the developed IMCT model shows a reliable agreement with the measured phosphorus distribution ratio
by using the calculated mass action concentrations of iron oxides as presentation of slag oxidation ability. Meanwhile, the
developed thermodynamic model for calculating the phosphorus distribution ratio can determine quantitatively the respective
dephosphorization contribution ratio of Fe
t
O, CaO + Fe
t
O, MgO + Fe
t
O, and MnO + Fe
t
O in the slags. A significant difference of dephosphorization ability among Fe
t
O, CaO + Fe
t
O, MgO + Fe
t
O, and MnO + Fe
t
O has been found as approximately 0.0 pct, 99.996 pct, 0.0 pct, and 0.0 pct during a combined blown converter steelmaking
process, respectively. There is a great gradient of oxygen activity of molten steel at the slag–metal interface and in a metal
bath when carbon content in a metal bath is larger than 0.036 pct. The phosphorus in molten steel beneath the slag–metal interface
can be extracted effectively by the comprehensive effect of CaO and Fe
t
O in slags to form 3CaO·P2O5 and 4CaO·P2O5 until the carbon content is less than 0.036 pct during a top–bottom combined blown steelmaking process. |
| |
Keywords: | |
本文献已被 SpringerLink 等数据库收录! |
|