首页 | 本学科首页   官方微博 | 高级检索  
     

细纱前后档胶辊直径搭配试验分析
引用本文:马忠智,丰明磊,牛菲菲. 细纱前后档胶辊直径搭配试验分析[J]. 棉纺织技术, 2007, 35(5): 49-51
作者姓名:马忠智  丰明磊  牛菲菲
作者单位:河南延津纺织有限公司
摘    要:为了了解细纱前后档胶辊直径搭配对成纱质量的影响,采用不同硬度、不同直径的前档胶辊,分别配置不同直径的后档胶辊进行纺纱试验.结果表明:直径28.9 mm、邵尔A65度的ME666型前档胶辊,后档配直径差异小的胶辊对成纱质量有利;直径29.7 mm、邵尔A65度的J463型前档胶辊,后档配直径差异大的胶辊对成纱质量有利;直径29.8 mm、邵尔A68度的W888型前档胶辊,在罗拉中心距不同时,后档胶辊配置有变化.指出:后档胶辊直径大小影响后区对纤维的握持控制能力,纺纱生产中当前档胶辊直径、硬度及罗拉中心距等条件不同时,要注意前后档胶辊直径的合理搭配.

关 键 词:细纱  胶辊  直径  硬度  工艺  握持力  质量
文章编号:1001-7415(2007)05-0049-03
修稿时间:2006-11-30

Test Analyses of Diameter Matching of Front Top Roller and Back Top Roller of Spinning Frame
Ma zhongzhi,Feng Minglei,Niu Feifei. Test Analyses of Diameter Matching of Front Top Roller and Back Top Roller of Spinning Frame[J]. Cotton Textile Technology, 2007, 35(5): 49-51
Authors:Ma zhongzhi  Feng Minglei  Niu Feifei
Affiliation:Yanjin Textile Co. , Ltd. , Henan
Abstract:To study influence on yarn quality of diameter matching of front top roller and back top roller of spinning frame,spinning test with different hardness & different diameter front top roller and different diameter back top roller was done.The result shows that front top roller of diameter 28.9 mm and hardness A65 can has better yarn quality when matching back top roller of small diameter difference,J463 front top roller of diameter 29.7 mm and hardness A65 can has better yarn quality when matching back top roller of big diameter difference,W888 front top roller of diameter 29.8 mm and hardness A68 has change matching back top roller when ratch is different.The test shows that back top roller diameter can influence back area gripping ability,reasonable matching of front top roller and back top roller is very important in the condition of different front top roller diameter,hardness and ratch.
Keywords:Spun Yarn   Top Roller   Diameter   Hardness   Processing   Griping Ability   Quality
本文献已被 CNKI 维普 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号