| 1Cr13不锈钢冷轧导轨孔型设计 |
| |
| 引用本文： | 马海君,芮勇.1Cr13不锈钢冷轧导轨孔型设计[J].焊管,2010,33(5):36-37. |
| |
| 作者姓名： | 马海君 芮勇 |
| |
| 作者单位： | 上海申花钢管有限公司,上海,200062 |
| |
| 摘 要： | 介绍了在32 mm高频焊管机组上生产1Cr13不锈钢冷轧导轨的成型方法。对孔型设计、成型和变形道次的确定以及设计参数的计算公式进行了举例说明。用所设计的孔型生产的A型和B型导轨,尺寸公差和形位公差达到了客户的质量要求。
|
| 关 键 词： | 1Cr13不锈钢导轨 孔型设计 成型方法 中性层 |
Pass Design for 1Cr13 Stainless Lead Rail |
| |
| MA Hai-jun,RUI Yong.Pass Design for 1Cr13 Stainless Lead Rail[J].Welded Pipe and Tube,2010,33(5):36-37. |
| |
| Authors: | MA Hai-jun RUI Yong |
| |
| Affiliation: | (Shanghai Shenhua Steel Tube Co.,Ltd.,Shanghai 200062,China) |
| |
| Abstract: | This article introduced forming method for processing 1Cr13 cold-rolled stainless lead rail in 32 mm high frequency welded pipe unit.It illustrated pass design,forming,exterminating deformation pass and calculation formula for design parameter.Tolerance of dimension and geometric tolerance of A and B lead rails can meet customs,quality requirements adopting designed pass. |
| |
| Keywords: | 1Cr13stainless lead rail pass design forming method neutral layer |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
