| 零件的参数设计 |
| |
| 引用本文： | 孙巍,曾坤,张文波.零件的参数设计[J].湖南工业大学学报,1998(Z1). |
| |
| 作者姓名： | 孙巍 曾坤 张文波 |
| |
| 作者单位： | 株洲工学院!株洲412008 |
| |
| 摘 要： | 在零件参数最初设定的基础上，通过建立数学模型，综合考虑零件成本以及产品的质量损失，借助电子计算机，采用蒙特卡洛模拟的方法，对零件的参数重新设定以实现优化配置，达到生产费用最低。
|
| 关 键 词： | 蒙特卡洛模拟 深度优化 传递系数 |
Design for part Coefficient |
| |
| Shun Wei,Zeng kun,Zhang Wenbo.Design for part Coefficient[J].Journal of Hnnnan University of Technology,1998(Z1). |
| |
| Authors: | Shun Wei Zeng kun Zhang Wenbo |
| |
| Abstract: | In order to come to the least production expense,it is needed to redesign the part coefficient to bring about optimizing disposition which is made by computer on the basis of designing the original part coefficient,building Maths mould,and studying synthetically part cost and the quality loss of products. |
| |
| Keywords: | Monte Carlo method depth optimization transterring coefficient |
| 本文献已被 CNKI 等数据库收录！ |
