| 200 kA预焙铝电解槽强化电流的生产实践 |
| |
| 引用本文： | 戴小平.200 kA预焙铝电解槽强化电流的生产实践[J].中国有色冶金,2006(5):11-12. |
| |
| 作者姓名： | 戴小平 |
| |
| 作者单位： | 中国铝业青海分公司,青海,大通,810108 |
| |
| 摘 要： | 介绍了青海铝200kA预焙槽强化电流的生产实践.在不改变电解槽结构和外部环境的情况下,电流强化5%,可以提高产能9%.强化电流对电流效率影响不大,节电效果显著.
|
| 关 键 词： | 200 kA铝电解槽 强化电流 技术条件 电流效率 |
| 文章编号： | 1672-6103(2006)10-0011-02 |
| 修稿时间： | 2005年11月25 |
Production practice of 200kA pre-baked aluminum smelting cell with intensified electric current |
| |
| DAI Xiao-ping.Production practice of 200kA pre-baked aluminum smelting cell with intensified electric current[J].China Nonferrous Metallurgy,2006(5):11-12. |
| |
| Authors: | DAI Xiao-ping |
| |
| Affiliation: | DAI Xiao-ping |
| |
| Abstract: | This paper describes the production practice of 200 kA pre-baked cell with intensified current in Qinghai Aluminum Plant.It is possible to raise production capacity by 9% in case the current is intensified by 5% without change of cell structure and external conditions,and the intensified current would cause almost no influence on the current efficiency and will yield notable results in power saving. |
| |
| Keywords: | 200 kA aluminum cell intensified current technical conditions current efficiency |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
