| 摆线针轮行星传动中摆线轮最佳修形量的分析与计算 |
| |
| 引用本文： | 张世安. 摆线针轮行星传动中摆线轮最佳修形量的分析与计算[J]. 机械科学与技术, 2002, 21(6): 906-908 |
| |
| 作者姓名： | 张世安 |
| |
| 作者单位： | 常德师范学院机械工程系 常德415003 |
| |
| 摘 要： | 通过对目前摆线针轮行星传动中摆线轮的修形方式进行了分析 ,提出了最佳修形齿廓的概念 ,对采用“负移距 +正等距”修形方法获得最佳修形齿廓原理进行了探讨 ,推导出了摆线针轮最佳修形量的计算公式。根据最佳修形量研制的样机通过试验也证明了修形理论的正确性
|
| 关 键 词： | 摆线针轮行星传动 最佳修形齿廓 最佳修形量计算公式化 样机试验验证 |
| 文章编号： | 1003-8728(2002)06-0906-03 |
| 修稿时间： | 2001-06-20 |
The Optimum Profile Analysis and Calculation on Cycloid Disks in the Cycloid Gearing Mechanism with Small Teeth Difference |
| |
| ZHANG Shi an. The Optimum Profile Analysis and Calculation on Cycloid Disks in the Cycloid Gearing Mechanism with Small Teeth Difference[J]. Mechanical Science and Technology for Aerospace Engineering, 2002, 21(6): 906-908 |
| |
| Authors: | ZHANG Shi an |
| |
| Abstract: | Based on the analysis of three different profile modification on cycloid disks,the concept of optimum modified tooth profile is formed, and through the combination modification of "megative moved distance positive equidistance", the optimum tooth profile can be obtained. A series of formulas are also given to calculate the optimum modification values of moved distance and equidistance. Practical use shows that the theory is satisfactory. |
| |
| Keywords: | Cycloid gearing mechanism Optimum modified profile Optimum modification formulas |
| 本文献已被 CNKI 维普 等数据库收录！ |
